ATIC IS INVITED TO ATTEND THE 2023 BRAKE ANNUAL CONFERENCE

ATIC IS INVITED TO ATTEND THE 2023 BRAKE ANNUAL CONFERENCE

RELEASE DATE:2023-10-31 10:22
Brief: October 24 -25 "2023 Brake Annual Meeting" in Wuhan grand opening, this annual meeting brought together the vehicle factory, brake assembly, wire chassis suppliers, brake parts enterprises, friction material enterprises, manufacturing process equipment suppliers, testing equipment enterprises, lubricating oil enterprises, universities, government research institutions and other related fields of excellent experts. The latest research results and practical experience in the fields of brake system development trend, wire control motion, EMB, new friction materials, carbon ceramic motion disc, brake emission and so on are discussed, which provides useful ideas and directions for the development of brake system. ATIC was invited to participate in the brake annual meeting, and customers, cooperation institutions and industry experts in the same industry conducted in-depth communication and discussion.


OVERSEAS MARKET TREND
With the continuous development of the global automobile market, the demand for overseas certification of brake pads is increasing year by year, and the requirements of certification regulations are gradually increasing. This is mainly because brake pads are a very important part of the automotive safety system, and their quality and performance directly affect the safety performance of the vehicle. Therefore, many countries and regions have developed strict regulations and standards, the safety and environmental performance of brake pads and other aspects of the clear provisions and requirements.

In these regulations and standards, some are for the performance and safety requirements of brake pads, and some are for the manufacturing and sales of brake pads. For example, some countries have strict requirements on the friction performance, wear rate, noise and other aspects of brake pads to ensure that brake pads can play the best performance during emergency braking. At the same time, some countries also have strict management of the manufacturing and sales of brake pads, requiring manufacturers to meet certain production conditions and management systems in order to obtain production and sales licenses.

In addition, some international certification bodies have also developed the corresponding certification standards and procedures, third-party certification of brake pads. For example, the Economic Commission for Europe (ECE) has developed an E-mark certification system, requiring brake pads, brake shoes, brake discs, brake drums and other safety parts to pass E-mark certification in order to enter the European market. Similarly, the U.S. Department of Transportation (DOT) has also developed corresponding certification procedures, requiring brake pads to enter the U.S. market to meet DOT certification standards.

OFFERS GLOBAL CERTIFICATION OF BRAKE COMPONENTS
  ChinaChinaEU USA Japan AustraliaSouth Korea Philippines
Vietnam India UAE BrazilEAEU Argentina
Certification
CCCCQCEMARK DOT AMECA JIS ADRKC BPS VR CMVR ESMA INMETROEAC CHAS
Authority
Certification and Accreditation Administration of the People's Republic of China
China Quality Certification Centre
Ministry of Transportation of member states of 1958 Agreement
Department of Transportation
Automotive Manufacturers Equipment Compliance Agency
Japan Ministry of Economy, Trade and Industry
Department of Infrastructure, Transport, Cities and Regional Department
Korea Ministry of Land, Infrastructure and Transport
Bureau of Philippine Standards
Vietnam Ministry of Transportation
Ministry of Road Transport and Highways
Emirates Authority for Standardization and Metrology
National Institute of Metrology, Standardization and Industrial Quality
Eurasian Economic Union
Argentine Ministry of Industry
Testing Location
China
China
China / Europe
China / US
China / US
Japan
China
Korea
China / Philippines
Vietnam
India
China
China
China / Russia
China / Argentina
Conformity of Production
Initial Audit + Surveillance Audit
Initial Assessment + CoP
Initial Assessment + CoP
None
None
Initial Assessment + CoP
Possible Factory Audit
None
Initial Audit + Surveillance Audit
Initial Audit + Surveillance Audit
Initial Assessment + CoP
None
Initial Audit + Surveillance Audit
Initial Assessment + CoP  
Initial Assessment + CoP
Regulation /
Standard
GB 5763
GB 16897
ECE R90
ECE R13
ECE R13H
ECE R78
FMVSS 106
FMVSS 116
SAE J 1288-2005
SAE J 1401-2003
SAE J 1402-2006
SAE J 1403-2005
SAE J 1406-2007
SAE J 1873-2003
SAE J 75-2006
SAE J 291-1980
SAE J 1703-2008
SAE J 1704-2008
SAE J 1705-2007
SAE J 1706-1995
SAE J 1707-2002
FMVSS 106
FMVSS 116
VESC V-3
SAE J 1288-2005
SAE J 1401-2003
SAE J 1402-2006
SAE J 1403-2005
SAE J 1406-2007
SAE J 1873-2003
SAE J 75-2006
SAE J 291-1980
SAE J 1703-2008
SAE J 1704-2008
SAE J 1705-2007
SAE J 1706-1995
SAE J 1707-2002
JISD4413
JISD4414-1
JISD4414-2
JISD4415
JISD4416
JISD4417
JISD4418
JISD4419
JISD4420
JISD4421
JISD4422
JISK2233
JISD2601
ADR 42
KMVSS Article 112-2
KMVSS Article 112 -10
National Technical Standards Notice No. 2017-032
PNS 239/MVSS 116:1988

22TCN 296-02
TCVN 11496-2016
TCVN 11497-2016
TCVN 11498-2016
TCVN 11499-2016
TCVN 11500-2016
TCVN 11501-2016
TCVN 11502-2016
TCVN 11503-2016
TCVN 11496-2016
TCVN 6822-2001
TCVN 6823-2001
TCVN 7237-2003
TCVN 7236-2003
TCVN 7235-2003
AIS-061
IS 7079-2008
UAE.S/GSO ECE 90 UAE.S GSO ECE 13-1 UAE.S GSO ECE 13-2 UAE.S GSO ECE 13-3 UAE.S GSO ECE 13-4 UAE.S GSO ECE 13-5 UAE.S GSO ECE 13-6 UAE.S GSO ECE 13H
Ordinance no. 145/2022
Ordinance no. 456/2021
TR TS 030/2012
IRAM AITA 6-C2
IRAM AITA, 6H1, 6H2, 6H3, 6H4, 6H5, 6H10
Components
Brake lining
Brake hose (hydraulic / pneumatic / vacuum)
Brake lining, Brake drum and brake disc
Brake fluids, Brake hose (hydraulic / pneumatic / vacuum)
Brake lining, Brake fluids, Brake hose (hydraulic / pneumatic / vacuum)
Brake lining, Brake fluids, Brake hose (hydraulic)
Brake hose (hydraulic / pneumatic / vacuum)
Brake lining, Brake Fluids, Brake hose (hydraulic / pneumatic / vacuum)
Brake fluids
Motorcycle brake hose
Brake lining, Brake hose (hydraulic)
Brake lining, Brake drum and brake disc
Brake lining, Brake fluids
Brake fluids
Brake lining, Brake fluids
Main test items
*The specific test items may different for different product categories or specifications.

Brake lining
Asbestos detection
Harmful elements detection
Friction performance test
Shear strength test
Brake hose
Expansion test
Burst strength test
Anti-jitter test
Tensile strength test
Water absorption sequence tests
Low temperature resistance test
Brake fluid compatibility test
Ozone resistance test
Dynamic ozone test
High temperature impulse test
End fitting corrosion test
Constriction test
1) Brake lining   
Brake testing
Cold performance equivalence test
Speed sensitivity test
Mechanical characteristics Test-Shear strength, Compressibility, friction coefficient
2) Brake drum and brake disc
Geometric requirements
Performance tests according to Regulations No. 13/13-H
Comparison test with dynamic frictional properties of the original part
High load and thermal fatigue test

1)  Motor Vehicle Brake Fluids 
Equilibrium reflux boiling point
Wet ERBP
Kinematic viscosities
pH value
Fluid stability
Corrosion
Fluidity and appearance at low temperatures
Water tolerance
Compatibility
Resistance to oxidation
Effect on SBR cups
Stroking properties
Container information
2) brake hose-hydraulic, pneumatic, vacuum
Expansion test
Burst strength test
Whip resistance test
Tensile strength test
Water absorption sequence tests
Low temperature resistance test
Brake fluid compatibility test
Ozone resistance test
Dynamic ozone test
High temperature impulse test
End fitting corrosion test
Constriction test
etc.

1) Brake Linings 
Baseline Run
First Run
Wear run
Second Run
Baseline Rerun
2) Motor Vehicle Brake Fluids
Equilibrium reflux boiling point
Wet ERBP
Kinematic viscosities
pH value
Fluid stability
Corrosion
Fluidity and appearance at low temperatures
Water tolerance
Compatibility
Resistance to oxidation
Effect on SBR cups
Stroking properties
Container information
3) brake hose-hydraulic, pneumatic, vacuum
Expansion test
Burst strength test
Whip resistance test
Tensile strength test
Water absorption sequence tests
Low temperature resistance test
Brake fluid compatibility test
Ozone resistance test
Dynamic ozone test
High temperature impulse test
End fitting corrosion test
Constriction test
etc.
1) Brake Linings
Compressive strain test
Anti-rust test
Shear strength test
Thermal expansion test
Hardness Testing
Shear test
2) Motor Vehicle Brake Fluids
Equilibrium reflux boiling point
Wet ERBP
Kinematic viscosities
pH value
Fluid stability
Corrosion
Fluidity and appearance at low temperatures
Water tolerance
Compatibility
Resistance to oxidation
Effect on SBR cups
Stroking properties
Container information
3) Hydraulic brake hose
Expansion test
Burst strength test
Whip resistance test
Tensile strength test
Water absorption sequence tests
Low temperature resistance test
Brake fluid compatibility test
Ozone resistance test
Dynamic ozone test
High temperature impulse test
End fitting corrosion test
Constriction test
1) brake hose-hydraulic, pneumatic, vacuum 
Expansion test
Burst strength test
Whip resistance test
Tensile strength test
Water absorption sequence tests
Low temperature resistance test
Brake fluid compatibility test
Ozone resistance test
Dynamic ozone test
High temperature impulse test
End fitting corrosion test
Constriction test
High temperature resistance test
Oil resistance test
Length change test
Flex strength and air pressure test.
Corrosion resistance and burst strength test
Water Absorption and tensile strength test
Zinc chloride resistance test
Vacuum test
Bend test
Swell and adhesion test
Deformation test

1) Brake Linings
Compressibility test
Shear strength test
Hardness Testing
2) Motor Vehicle Brake Fluids
Equilibrium reflux boiling point
Wet ERBP
Kinematic viscosities
pH value
Fluid stability
Corrosion
Fluidity and appearance at low temperatures
Water tolerance
Compatibility
Resistance to oxidation
Effect on SBR cups
Stroking properties
Container information
3) brake hose-hydraulic, pneumatic, vacuum
Expansion test
Burst strength test
Whip resistance test
Tensile strength test
Water absorption sequence tests
Low temperature resistance test
Brake fluid compatibility test
Ozone resistance test
Dynamic ozone test
High temperature impulse test
End fitting corrosion test
Constriction test
etc.
1) Motor Vehicle Brake Fluids
Equilibrium reflux boiling point
Wet ERBP
Kinematic viscosities
pH value
Fluid stability
Corrosion
Fluidity and appearance at low temperatures
Water tolerance
Compatibility
Resistance to oxidation
Effect on SBR cups
Stroking properties
Container information
1) Motorcycle brake hose
Tolerance for length
Requirement of fitting
Installation of cap and cove
Threaded joints requirement
Length of patchwork and lead holding material
Surface defects
Conductor surface requirements
Installation of protective covers
Slip resistance
Control performance
Durability
1) Brake lining  
Brake testing
Cold performance equivalence test
Speed sensitivity test
Mechanical characteristics Test-Shear strength, Compressibility, friction coefficient
2) Hydraulic brake hose
Expansion test
Burst strength test
Whip resistance test
Tensile strength test
Water absorption sequence tests
Low temperature resistance test
Brake fluid compatibility test
Ozone resistance test
Dynamic ozone test
High temperature impulse test
End fitting corrosion test
Constriction test
1) Brake lining  
Brake testing
Cold performance equivalence test
Speed sensitivity test
Mechanical characteristics Test-Shear strength, Compressibility, friction coefficient
2) Brake drum and brake disc
Geometric requirements
Performance tests according to Regulations No. 13/13-H
Comparison test with dynamic frictional properties of the original part
high load and thermal fatigue test
1) Brake Linings
Shear test
Dilation and growth
Asbestos detection
Hot compressibility
Compressibility ambient temperature
Hot compressibility
2) Motor Vehicle Brake Fluids
Equilibrium reflux boiling point
Wet ERBP
Kinematic viscosities
pH value
Fluid stability
Corrosion
Fluidity and appearance at low temperatures
Water tolerance
Compatibility
Resistance to oxidation
Effect on SBR cups
Stroking properties
1) Motor Vehicle Brake Fluids
Equilibrium reflux boiling point
Wet ERBP
Kinematic viscosities
pH value
Fluid stability
Corrosion
Fluidity and appearance at low temperatures
Water tolerance
Compatibility
Resistance to oxidation
Effect on SBR cups
Stroking properties
Container information
1) Brake lining 
Brake testing
Cold performance equivalence test
Speed sensitivity test
Mechanical characteristics Test-Shear strength, Compressibility, friction coefficient
2) Motor Vehicle Brake Fluids
Equilibrium reflux boiling point
Wet ERBP
Kinematic viscosities
pH value
Fluid stability
Corrosion
Fluidity and appearance at low temperatures
Water tolerance
Compatibility
Resistance to oxidation
Effect on SBR cups
Stroking properties
Container information


ATIC GLOBAL AUTOMOTIVE CERTIFICATION SERVICE
ATIC Vehicle certification experts have an average of more than 10 years of experience in the field of motor vehicle certification and are familiar with national certification processes, local regulations and testing requirements. ATIC cooperates with official agencies of many countries to integrate high-quality testing and certification resources, provide one-stop certification services for automotive products worldwide, and assist manufacturers to complete the certification cycle plan, including certification application, document preparation, regulatory guidance and training, pre-test, test integration, etc. With the best service and the fastest efficiency to assist vehicle and component manufacturers one-stop access to the global market.

ABOUT ATIC
ATIC is a technical service company from China, established in 2015. By creating a better entrepreneurial environment, we build a professional and passionate team with the best experts, returnees and extraordinary graduates. We are committed to integrate international and domestic regulations, testing and certification resources from a globalization perspective, to establish a neo-specialized regulation research, testing and certification platform. ATIC serves more than 4,500 manufactures per year.
 
 
BRAKE COMPONENTS CERTIFICATION PLEASE CONTACT
Theo
Theo
Sales Department
Sales Engineer, West & North China. Theo is committed to improve customer experience and relationship with systematic, professional and digitalized methods and practices.
Phone: +86 020-82510156
Mail: cs@atic-cn.com