Automotive Safety Glazing Global Homologation Solution
Establish a global certification program at the product development and design stage, proactively, orderly, and low-risk access to multiple target markets

Global Homologation Matrix – Automotive Safety Glazing
Automotive Safety Glazing are one of the important safety components of motor vehicles, and their performance is critical to vehicle safety. In order to ensure vehicle safety and road traffic safety, many countries around the world have mandatory certification requirements for automotive safety glazing.

 
 China EU America Australia
JapanKorea Indonesia
Vietnam ThailandPhilippinesIndia UAE BrazilEurasian Union ArgentinaSouth Africa
 Certification
CCCEMARK DOT AMECA ADRJIS KC SNI VR TISIBPSCMVR ESMA INMETROEAC CHASNRCS
Authority
Certification and Accreditation Administration of the People's Republic of China
Ministry of Trasportation of member states of 1958 Agreement
United States Department of Transportation
Automotive Manufacturers Equipment Compliance Agency
Australia Department of Transportation
Ministry of Economy, Trade and Industy
Korea Ministry of Land, Infrastructure and Transport,
or Korea Ministry of Trade, Industry and Energy
Indonesia Ministry of Industry
Vietnam Register
Thai Industrial Standards Institute
Bureau of Philippine  Standards
The Ministry of Road Transport and Highways
Emirates Authority for Standardization and Metrology
National Institute of Metrology, Standardization and Industrial Quality
Eurasian Economic Commission
Argentina National Directorate of Industry
South Africa National Regulator of Compulsory Specification
Testing Location
China
China / Europe
China / US
China / US
China
Japan
South Korea
Indonesia
Vietnam
Thailand
Philippines
India
China
China / Brazil
Russia / Kazakhstan
China/ Argentina
China / South Africa
Conformity of Production
Initial Audit + Surveillance Audit
Initial Assessment + CoP
None
None
Radom Audit
Initial Audit + Surveillance Audit
None
Initial Audit + Surveillance Audit
Initial Audit + Surveillance Audit
Initial Audit + Surveillance Audit
Initial Audit + Surveillance Audit
Initial Assessment + CoP
None
Initial Audit + Surveillance Audit
Initial Assessment + CoP
Initial Assessment + CoP
None
Regulation /
Standard
GB 9656
UN Regulation No. 43
FMVSS No. 205
ANSI Z26.1 
SAE J674
FMVSS No. 205
ANSI Z26.1 
SAE J674
ADR8
JIS R 3211
JIS R 3212
KMVSS Article 34
SNI 15-1326-2005
SNI 15-0048-2005 
SNI 15-0048-2005/Amd1: 2014
QCVN 32-2017/BGTVT
TCVN 6758-2015
TIS 2602-2556 (2013)
PNS 130:1988 Amd. 01:1998
IS 2553-2-1992
UAE.S GSO 1677/2003
UAE.S GSO 3537
UAE.S GSO 3538
Ordinance No. 41
TP TC 018/2011
IRAM-AITA: IRAM AITA 1H3
SANS 1191
SANS 1192
SANS 1193
Main Test Items
*The specific test items may different for different product categories or specifications.

Thickness 
Light transmission  
Secondary image
Optical distortion
Color recognition
Abrasion resistance
Heat resistance
Radiation resistance
Humidity
Headform test
Impact resistance
Penetration resistance
Fragmentation test
Resistance to temperature changes
Fire resistance
Chemical resistance
Fragmentation
Mechanical strength
Headform test
Abrasion
High temperature
Radiation
Humidity    
Light transmission  
Optional distortion
Secondary image
Resistance to temperature changes
Fire resistance
Resistance to chemicals
Flexibility
227 g ball
2,260 g ball
Weathering
Cross-cut
Light stability 
Light transmittance
Humidity resistance
Heat resistance  (not applicable to multilayer glass)
Baking resistance (only for multilayer glass)
Impact
Crushing
Distortion
Weathering
Abrasion resistance
Corrosion resistance
Dimensional stability
Elasticity
Fire resistance
Export
Penetration resistance
Emission characteristic
Resistance to temperature change

Light stability 
Light transmittance
Humidity resistance
Heat resistance  (not applicable to multilayer glass)
Baking resistance (only for multilayer glass)
Impact
Crushing
Distortion
Weathering
Abrasion resistance
Corrosion resistance
Dimensional stability
Elasticity
Fire resistance
Export
Penetration resistance
Emission characteristic
Resistance to temperature change
Fragmentation 
Mechanical strength
Headform test
Abrasion
High temperature
Radiation
Humidity    
Light transmission  
Optional distortion
Secondary image
Resistance to temperature changes
Fire resistance
Resistance to chemicals
Flexibility
227 g ball
2,260 g ball
Weathering
Cross-cut
Thickness measurement
Crushing test
Impact test
Penetration test
Headform test
Abrasion test
High temperature test
Radiation test
Humidity test
Light transmission
Optional distortion
Secondary image
Color discrimination test
Fire resistance test
Resistance to chemicals
Resistance to temperature changes
Dimensional stability test
Temperature dependence test
Light transmission   
Abrasive resistance
Resistance to temperature changes
Fire resistance
Resistance to chemicals
Radiation
High temperature
Humidity
Optional distortion
Secondary image
Headform test
227 g ball
2,260 g ball
Crushing test
Appearance 
Dimensions and tolerances
Light transmission  
Refractive index
Optional distortion
Radiation
High temperature test
Elastic performance test
Headform test
Abrasive resistance test
Humidity test
Flatness
Fragmentation test
Impact resistance
Fragmentation 
Mechanical strength
Headform test
Abrasion -Outer face, inter face
High temperature
Radiation
Humidity
Light transmission
Optional distortion
Secondary image
Resistance to temperature changes
Fire resistance
Resistance to chemicals
Flexibility
227 g ball
2,260 g ball
Weathering
Cross-cut
Mechanical strength
Head-form test
Abrasion resistance
High temperature
Radiation
Humidity
Light transmission
Optional distortion
Secondary image
Resistance to temperature changes
Fire resistance
Resistance to chemicals
Fragmentation
Mechanical strength
Head-form test
Abrasion resistance
High temperature
Radiation
Humidity
Light transmission
Optional distortion
Secondary image
Resistance to temperature changes
Fire resistance
Resistance to chemicals
Fragmentation
Dimensions and tolerances 
Light transmission
Impact resistance
Boil test
Light stability
Penetration resistance test
Head-form test
Fragmentation test
Optional distortion
Secondary image
Mechanical strength 
Head-form test
Abrasion resistance
High temperature
Radiation
Humidity
Light transmission
Optional distortion
Secondary image
Resistance to temperature changes
Fire resistance
Resistance to chemicals
Pigmentation range 
Mechanical strength
Head-form test
Abrasion resistance
High temperature
Radiation
Humidity
Light transmission
Optional distortion
Secondary image
Fragmentation test
227g ball Impact
Fragmentation 
Mechanical strength
Headform test
Abrasion
High temperature
Radiation
Humidity    
Light transmission  
Optional distortion
Secondary image
Resistance to temperature changes
Fire resistance
Resistance to chemicals
Flexibility
227 g ball
2,260 g ball
Weathering
Cross-cut
Fragmentation
Mechanical strength
Headform test
Abrasion
High temperature
Radiation
Humidity    
Light transmission  
Optional distortion
Secondary image
Resistance to temperature changes
Fire resistance
Resistance to chemicals
Flexibility
227 g ball
2,260 g ball
Weathering
Cross-cut
Dimensions and tolerances
Light transmission  
Secondary image
Boil test
Radiation test
Tests for fracture and adhesion and impact resistance
Humidity test
appearance
Refractive index
Optional distortion
Radiation
High temperature test
Elastic performance test
Headform test
Abrasive resistance test
Flatness
Fragmentation test
Impact resistance
Marks
ATIC | 泰测 一站式检测、认证、验货与咨询服务
www.atic-cn.com
Get a Quotation Now

Log in to ATICTM Digital Customer Platform to request quotations, browse 16000+ regulations and 
SoPs cover more than 54 countries, submit information documents and manage your certification projects.

Global Homologation Solution

ATIC CCC Certification Service

CCC certification, China Compulsory Certification, is a product conformity assessment system implemented by the Chinese government in order to protect consumers' personal safety and national security, strengthen product quality management, and comply with laws and regulations. The CCC certification is a mandatory certification required by the People's Republic of China for the import, export, manufacture, sale, and use of various products. Only certified products can be considered to meet mandatory requirements in terms of safety, electromagnetic compatibility (EMC), and environmental protection. Car safety glass shall be subject to compulsory certification according to the implementation rules of CNCA: CNCA-C13-01 "Safety Glass".

In addition, according to China National Market Supervision Administration's Announcement No. 44 of 2019, automotive safety glass is included in the list of self-declaration evaluation methods applicable to compulsory product certification. Anyone who is included in the compulsory certification catalog and is allowed to use self-declaration to prove that the product continues to comply For products subject to compulsory certification applicable standards and implementation rules, companies must use self-declaration information reporting methods to submit timely, accurate, and comprehensive self-declaration-related information, and laboratories to report type-testing reports in a timely, accurate, and comprehensive manner. Information

Standards: GB 9656

Test Items:
Thickness, Light transmission, Secondary image, Optical distortion, Color recognition, Abrasion resistance, Heat resistance, Radiation resistance, Humidity, Headform test, Impact resistance, Penetration resistance, Fragmentation test, Resistance to temperature changes, Fire resistance, Chemical resistance

Please click here for more certification:
ATIC EU Homologation

Focus on road safety, environmental protection and public health. The so-called EU certification system is completed by the German StVZO standard, the EU Directive/Regulation and the UNECE Regulation. The StVZO standard applies to Germany, the EU directives/regulations apply to more than 30 European Free Trade Association countries, and UNECE is accepted by the EU and more than 50 countries in the UN framework. It‘s commonly known as German ABE certification, e-mark certification and E-mark certification.

Regulation: 
UN Regulation No. 43: Uniform provisions concerning the approval of safety glazing materials and their installation on vehicles

Test Items:
Fragmentation, Mechanical strength, Headform test, Abrasion, High temperature, Radiation, Humidity, Light transmission, Optional distortion, Secondary image, Resistance to temperature changes, Fire resistance, Resistance to chemicals, Flexibility, 227 g ball, 2,260 g ball,  
Weathering,  Cross-cut

Procedure:
Application information filling, initial factory audit (if any), witness test, rectification (if any), certificate application, certificate issuance\

Please Click here for more EU Certification: 
dcb5232a203a2a1fb91eeebb45aebf69

United States Department of Transportation, abbreviated DOT, is headquartered in Washington. As the functional department of the US government, the US Department of Transportation develops and improves transportation and transportation-related regulations to meet environmental and national defense needs. The Department of Transportation is also a basic department of the federal government, responsible for formulation and management. Policies and projects to protect and improve the safety, appropriateness and effectiveness of transportation system services. According to the DOT regulations of the US Department of Transportation, where vehicles and key components are exported to the US market, they must pass DOT certification and mark the corresponding DOT mark on the product. The product has passed the DOT certification and is marked with the corresponding mark, indicating that the product meets the requirements of the US FMVSS standard and has passed the corresponding test or manufacturer's statement.

Regulation:
49 CFR Part 571 FMVSS  No. 205, Glazing Materials

ANSI Z26.1 -Safety Glazing Materials for Glazing Motor Vehicles and Motor Vehicle Equipment Operating on Land Highways - Safety Standard

SAE J674 -Safety Glazing Materials-Motor Vehicles and Motor Vehicle Equipment

Test Items:
Light transmittance, Humidity resistance, Heat resistance  (not applicable to multilayer glass), Baking resistance (only for multilayer glass), Impact, Crushing, Distortion, Weathering, Abrasion resistance,  Corrosion resistance, Dimensional stability, Elasticity, Fire resistance,  Export, Penetration resistance, Emission characteristic, Resistance to temperature change

Please click here for more North America certifications: 
北美ameca

Automotive Manufacturers Equipment Compliance Agency, abbreviated AMECA, is the US agency that specializes in automotive safety equipment/safety component compliance programs. The US AMECA certification is the responsibility of the American Automotive Industry Equipment Certification Body. All tests must be carried out in AMECA-accredited laboratories. The AMECA certification is designed to provide manufacturers with more competitive quality certifications for automotive parts, enhance brand value and enhance consumer confidence. AMECA certified product range includes hubs, brake hoses, brake fluids, lighting, rearview mirrors, warning triangles, window glass, and more.

Standard: 
49 CFR Part 571 FMVSS  No. 205, Glazing Materials

ANSI Z26.1 -Safety Glazing Materials for Glazing Motor Vehicles and Motor Vehicle Equipment Operating on Land Highways - Safety Standard

SAE J674 -Safety Glazing Materials-Motor Vehicles and Motor Vehicle Equipment

Test Items:
Light transmittance, Humidity resistance, Heat resistance  (not applicable to multilayer glass), Baking resistance (only for multilayer glass), Impact, Crushing, Distortion, Weathering, Abrasion resistance,  Corrosion resistance, Dimensional stability, Elasticity, Fire resistance,  Export, Penetration resistance, Emission characteristic, Resistance to temperature change

Procedure: 
Light transmittance, Humidity resistance, Heat resistance  (not applicable to multilayer glass), Baking resistance (only for multilayer glass), Impact, Crushing, Distortion, Weathering, Abrasion resistance,  Corrosion resistance, Dimensional stability, Elasticity, Fire resistance,  Export, Penetration resistance, Emission characteristic, Resistance to temperature change

Please click here for more North America certifications: 
ADR certification

The Australian Motor Vehicle Design Rules (ADR for short) is the national standard for Australian motor vehicles and trailers specified by the Australian Motor Vehicle Standards Act MVSA 1989. The main contents include vehicle safety, environmental protection and theft prevention. Both component manufacturers and importers must comply with the implementation, so that vehicles or components produced or imported meet the requirements of a series of ADR standards.

Under the Automotive Standards Act 1989, all new motor vehicles are required to be fitted with an Identification Plate, which can provide certification to states' registration authorities, new car owners, and all members of the public that this new car can be used in Australian public Driving on the road. In Australia, the entire process from application to obtaining the Identification Plate is called Certification. The entire certification process is managed by the Australian Government Department and the competent authority is the Australian Department of Infrastructure, Transport and Regional Services (DOTARS). Under the Vehicle Safety Standards Bureau (VSS). There are mainly three types of certification for new car products in Australia: Full Volume, Low Volume, and Low Production Passenger Cars.


Standard:  
ADR 8 - Safety Glazing Material

Test Items:
Fragmentation, Mechanical strength, Headform test, Abrasion, High temperature, Radiation, Humidity, Light transmission, Optional distortion, Secondary image, Resistance to temperature changes, Fire resistance, Resistance to chemicals, Flexibility, 227 g ball, 2,260 g ball, Weathering, Cross-cut

Procedure: 
Submit application, test, rectification (if any), registration, registration completed

Please click here for more Australia certifications: 
ATIC Japan Vehicle Type Approval Service

JIS are standards formulated and reviewed by the Japan Industrial Standards Survey Committee. It is the most important and authoritative certification standard among Japanese national standards. JIS standards cover various industrial fields, including construction, machinery, electrical, metallurgy, chemical, transportation, textile, ceramics and daily necessities. There are two types of JIS standards: mandatory and voluntary. Once they are enforced by JIS standards, they are compulsory certification standards. Japan JIS certification is regulated by Japan METI. Only products that pass the JIS standard test can use the JIS mark. 

Motor vehicle safety glass belongs to the R class ceramics of the JIS standard. The JIS certification of automobile safety glass represents the quality and reliability of the product and is recognized by Japanese consumers.

ATIC provides one-stop Japanese JIS certification services for manufacturers. In addition, ATIC technology can provide manufacturers with Japanese vehicle certification and full-range regulatory services. ATIC certification experts have conducted a systematic study of Japanese regulations and their car access, saving manufacturers time and providing better compliance and certification solutions.

Standard:  
JIS R 3211, JIS R 3212

Test Items: 
Thickness measurement, Crushing test, Impact test, Penetration test, Headform test, Abrasion test, High temperature test, Radiation test, Humidity test, Light transmission, Optional distortion, Secondary image, Color discrimination test, Fire resistance test, Resistance to chemicals, Resistance to temperature changes, Dimensional stability test, Temperature dependence test

Please click here for more Japan certifications:
ATIC Korea Vehicle Type Approval

Korea automotive product certification includes mandatory certification and voluntary certification. Compulsory certification regulations stipulate that the entire vehicle entering the Korean market must be certified by the Ministry of Land and Resources (MOT), the Ministry of Environmental Protection (MOE) and the Ministry of Industry (MOI) through certification of safety, environmental protection and fuel consumption label. For electric vehicles, it is necessary to pass the subsidy assessment test of the Ministry of Environmental Protection.

For automotive parts entering the aftermarket, KC (Korea Certification) certification is required. Currently, KC-certified automotive parts include: hubs, brake hoses, seat belts, lamps, rear reflectors, rear bumpers, tires, window glass, warning triangles, rear reflectors, brake pads, Reflective strip, low speed vehicle rear sign.

In addition, the Korea Auto Parts Association (KAPA) has established a voluntary certification system for auto parts, which aims to provide manufacturers with more competitive quality standards for auto parts and enhance brand value.


Standard:  
KMVSS Article 34 -Window Glass

Test Items: 
Light transmission, Abrasive resistance, Resistance to temperature changes, Fire resistance, Resistance to chemicals, Radiation, High temperature, Humidity, Optional distortion, Secondary image, Headform test, 227 g ball, 2,260 g ball, Crushing test

Procedure: 
Submit application, registration, testing, rectification (if needed), submission to the Ministry of Communications (KC), Ministry of Communications (KC)

Please click here for more Korea certifications: 
ATIC Indonesia Vehicle Type Approval

According to Indonesian Regulation No. 22/2009, any motor vehicle that will be used and operated on public roads must meet technical and road performance requirements. The vehicle manufacturer must first register with the Ministry of Industry of Indonesia (MoI) and then with the Ministry of Communications of Indonesia. (MoT) applied and sent the vehicle to the Indonesian Vehicle Testing and Certification Center (BPLJSKB) for testing, and finally obtained the entire vehicle type certification, the vehicle can enter the Indonesian market and be legally registered.

Motor vehicle parts that enter the Indonesian aftermarket must comply with the Indonesian SNI standard and pass relevant certification. The Indonesian SNI standard (Standard Nasional Indonesia) is formulated by the Indonesian National Standards Administration BSN. The auto parts products must be tested in the Indonesian domestic laboratory authorized by the Indonesian National Accreditation Council KAN, and the authorized auditors conduct the factory audit and other certification processes, and finally obtain SNI certificate. At present, Indonesia's mandatory certification of automotive parts and components includes: tires, wheels, glass, batteries, helmets.


Standard:  
SNI 15-1326-2005 Laminated Glass for Motor Vehicle

SNI 15-0048-2005 + SNI 15-0048-2005 / Amd1: 2014 Tempered Glass for Motor Vehicle

Test Items: 
Appearance, Dimensions and tolerances, Light transmission, Refractive index, Optional distortion, Radiation, High temperature test, Elastic performance test, Headform test, Abrasive resistance test, Humidity test, Flatness, Fragmentation test, Impact resistance

Procedure: 
Application, factory audit, sampling test, issuing certificate, supervision

Please click here for more Indonesia certification: 
Indonesia Whole Motor Vehicle Type Approval
ATIC Vietnam Vehicle Type Approval Serivce

The market access regulatory authority for Vietnamese automotive products is the Ministry of Transport of Vietnam and its subsidiary Motor Vehicle Registration Bureau. The certification model is vehicle type certification. The main legal basis is: Decision 58/2007/QS-BGTVT issued by the Minister of Communications (about The Motorcycle and Moped Type Certification Specification for the Assembly and Assembly of Motorcycles in Vietnam, Decision No. 34/2005/QS-BGTVT issued by the Minister of Communications (Regulations on the Type Approval of Motor Vehicles Made in Vietnam), issued by the Minister of Communications Decision No. 57/2007/QS-BGTVT (Regulations on Imported Motorcycles and Engine Inspection), Decision No. 35/2005/QS-BGTVT (Regulations on Imported Motor Vehicle Inspection) issued by the Minister of Communications.

The Vietnam Motor Vehicle Registration Bureau began in April 2018 to enforce Vietnamese VR certification for aftermarket auto parts. Currently, compulsory certification products include: wheels, tires, helmets, safety glass, rearview mirrors, headlights, Fuel tank, battery, interior materials, pressure capacitors, power batteries, etc.

Standard:  
QCVN 32-2017/BGTVT National technical regulation on safety glazing equipped on vehicle

TCVN 6758-2015 Road motor vehicles-Safety glazing and glazing material-Requirements and test methods in type approval

Test Items: 
Fragmentation, Mechanical strength, Headform test, Abrasion -Outer face, inter face, High temperature, Radiation, Humidity, Light transmission, Optional distortion, Secondary image, Resistance to temperature changes, Fire resistance, Resistance to chemicals, Flexibility, 227 g ball, 2,260 g ball, Weathering, Cross-cut

Procedure: 
Application, factory audit, sampling test, issuing certificate, supervision

Please click here for more vietnam certification:

Vietnam VR certificate example

Vietnam Vehicle and Component VR Certification

NBTC certification

The Thailand Industrial Standards Association is the competent authority for compulsory certification in Thailand. Its main functions are consumer protection, environmental protection and natural resource protection, promoting the international competitiveness of domestic industries, ensuring trade fairness and eliminating international trade barriers arising from standardization measures. The Thai Industrial Standard TIS was developed by TISI and currently has more than 2,000 standards covering a large number of consumer products, including vehicles, electrical appliances, food, building materials and so on.

The Ministry of Land Transport of Thailand is a subsidiary of the Ministry of Transport of Thailand. It is responsible for improving traffic laws, vehicle regulations and related regulations, improving public transport facilities and developing land transport networks. Thailand's motor vehicle certification includes emission certification and type certification, which are under the supervision and supervision of the Thai Industry Association and the Thai Ministry of Land Transport.


Standard:  
TIS 2602-2556 (2013) Safety glazing materials for vehicles.

Test Items: 
Mechanical strength, Head-form test, Abrasion resistance, High temperature, Radiation, Humidity, Light transmission, Optional distortion, Secondary image,Resistance to temperature changes, Fire resistance, Resistance to chemicals, Fragmentation 

Please click here for more Thailand certification: 
ATIC Philippine Vehicle Type Approval

According to the Philippine Standardization Law R.A. 4109-1964, the regulatory authority in charge of the Philippines is the Bureau of Philippine Standards in the Philippines, which is part of the Department of Trade and Industry (DTI). BPS is responsible for the development and promotion of Philippine National Standards, product testing and certification, and accreditation of test laboratory capabilities and certification of management system certification bodies to improve the quality of the Philippine products at the same time and to protect consumption. The interests of the company and the company.

BPS certification is mainly divided into three categories: electrical appliances, basic building materials, chemicals and other consumer products. At present, 86 products have been included in the BPS mandatory certification. Motor vehicle parts requiring mandatory certification include tires, brake fluids and seat belts. , motor vehicle safety glass, helmets, motor vehicles, liquefied petroleum gas cylinders, etc.


Standard:  
PNS 130:1988 Amd. 01:1998 Safety glass for automotive application – Specification

Test Items: 
Mechanical strength, Head-form test, Abrasion resistance, High temperature, Radiation, Humidity, Light transmission, Optional distortion, Secondary image,Resistance to temperature changes, Fire resistance, Resistance to chemicals, Fragmentation

Please click here for more philippines  certification: 
821e52f4085d629cdf134c79c788e01b

CMVR is the abbreviation of Central Motor Vehicles Rules. Its standard committee is called CMVR-TSC (CMVR-Technical Standing Committee) and belongs to the Indian Ship, Road Traffic and Highway Administration. Since 1991, the CMVR regulations stipulate that motor vehicles and their parts and components must be approved for type approval according to the CMVR regulations before entering the Indian market. The test items include safety and emissions. The certification process includes factory audit, type approval and production consistency.

Standard: 
IS 2553-2-1992 - Safety Glass, Part 2: For Road Transport.

Test Items: 
Dimensions and tolerances, Light transmission, Impact resistance,   Boil test, Light stability, Penetration resistance test, Head-form test,  Fragmentation test, Optional distortion, Secondary image


Procedure: 
Submit applications, audits, samples sent to Indian laboratories, testing, rectification (if any), certificate application, certificate issuance

Please click here for more India certification:
ATIC UAE ESMA Certification

ESMA, the English full name Emirates Authority for Standardization and Metrology, is the National Standard Body (NSB) authorized by the UAE government. According to the United Arab Emirates Federal Law No. 28, the UAE Standardization and Metrology Bureau was established in 2001 to be responsible for the formulation, review and revision. , release standards and technical regulations, and establish a National Measurement System (NMS). According to Cabinet Resolution No. 12 issued in 2018, compulsory certification for 15 categories of auto parts is required. Only auto parts products that have obtained the ESMA-issued certificate of conformity are allowed to enter the UAE market.

At present, Emirates ESMA Compulsory certification of auto parts are: wheel hub, brake system, brake pads, engine radiator, seat belt, rear view mirror, battery, internal combustion engine oil filter, air filter, laminated glass, door lock door hinge, reply Reflective signs and signaling devices, bus and commercial car alarm systems, flashers.

Standard: 
UAE.S GSO 3537 Motor Vehicles - Safety Glazing Materials - Mechanical Tests

Test Items: 
Mechanical strength, Head-form test, Abrasion resistance, High temperature, Radiation, Humidity, Light transmission, Optional distortion, Secondary image, Resistance to temperature changes, Fire resistance, Resistance to chemicals

Vehicle EAC Certification

Customs Union EAC certification is a passport for enterprise products to enter the Russian CIS countries. According to the agreement signed by Russia, Belarus and Kazakhstan on October 18, 2010, "Common Guidelines and Rules on Technical Specifications of the Republic of Kazakhstan, the Republic of Belarus and the Russian Federation", the Customs Union Committee is committed to the development of uniform standards for product safety. And requirements, a certification, the three countries common, resulting in the formation of the Russian Whitehall Customs Union Technical Regulations (CU-TR) certification, namely the EAC certification system. On January 1, 2015, with the participation of Armenia and Kyrgyzstan, the Customs Union was renamed the Eurasian Economic Union.

According to Resolution No. 526 of the Customs Union Commission of January 28, 2011, the list of products subject to the Customs Union EAC compulsory certification includes: tires, toys, children's products, beauty cosmetics, tableware, food, lubricants, fire extinguishing agents, fire fighting facilities. , building materials and their products, elevators, high-voltage equipment, low-voltage equipment, pressure equipment, medical equipment, telecommunications facilities, etc.

Standard: 
TR TS 018/2011

Test Items: 
Fragmentation, Mechanical strength, Headform test, Abrasion, High temperature, Radiation, Humidity, Light transmission, Optional distortion, Secondary image, Resistance to temperature changes, Fire resistance, Resistance to chemicals, Flexibility, 227 g ball, 2,260 g ball, 
Weathering, Cross-cut
零部件

The National Institute of Metrology, Standardization and Industrial Quality, abbreviated as INMETRO, is a government department directly under the Ministry of Development, Industry and Foreign Trade of Brazil. INMETRO's product range includes home appliances, medical devices, automotive parts, LED light sources, pressure vessels, etc. With the enactment of more new regulations and implementation rules, more and more products are included in the INMETRO mandatory certification.

Standard:  
Ordinance No. 41 - Automotive safety glasses.

Test Items: 
Pigmentation range, Mechanical strength, Head-form test, Abrasion resistance, High temperature, Radiation, Humidity, Light transmission, Optional distortion, Secondary image, Fragmentation test, 227g ball,Impact 

Procedure: 
Certification application, legal agent audit, document review, factory audit, sampling test, certificate issuance, INMETRO registration, supervision audit

Please click here for more Brazilian certification: 
Argentina Component Type Approval

The CHAS certification in Argentina is for the certification of auto parts. According to the regulations of the Argentine Ministry of Industry and the regulations No. 66, the relevant auto parts that are produced or imported locally need to be registered and certified by the Argentine Ministry of Industry. Allow sales in the Argentine market.

At present, the Brazilian CHAS compulsory certification parts include wheels, triangle warning signs, helmets, safety belts, brake pads, brake fluid, safety glass, fire extinguishers, headrests, seats and fixing points, coupling devices, rotary locks, vacuum pumps, batteries, Rearview mirrors, steering rods and ball heads, shock absorbers, steering boxes, horns, wipers and their components, automotive lamps, ballasts, safety vests, door lock door hinges, anti-theft and alarm devices, child restraint systems, safety Airbag system, brake components, axles, bumpers, etc.

Standard:  
UN Regulations IRAM AITA 10031

Test Items: 
Fragmentation, Mechanical strength, Headform test, Abrasion, High temperature, Radiation, Humidity, Light transmission, Optional distortion, Secondary image, Resistance to temperature changes, Fire resistance, Resistance to chemicals, Flexibility, 227 g ball, 2,260 g ball, Weathering,  Cross-cut

Procedure: 
Submit application, audit (if any), test (if any), rectification (if any), certificate application, certificate issuance

Please click here for more Argentina certification: 
南非
NRCS (National Regulator of Compulsory Specification) certification is a South African national compulsory certification that is supervised and managed by the South African National Mandatory Requirements Management Department. The regulation regulates some auto parts. Automotive products covered by the NRCS mandatory certification need to meet mandatory requirements. The standards adopted by the NRCS certification include the SABS standard, which is revised and published by the South African National Bureau of Standards.

The South African Bureau of Standards (SABS) is a subsidiary of the South African Ministry of Trade and Industry. It is a national statutory body. It was established in accordance with the National Standards Law promulgated in 1945 (No. 24 of 1945), and has been approved by The latest version revised in 2008 (No. 29, 2008). The South African Standards Bureau SABS is also a neutral third-party certification body responsible for system certification and product certification in South Africa. In addition to the responsibility of setting standards, SABS also represents the national management norms and standards, and grants the right to use logos for products that meet the norms. SABS mark certification is a voluntary certification, which has been widely used in various fields and has become a mark of product quality assurance.

Standard: 
SANS 1191 High penetration-resistant laminated safety glass for vehicle
SANS 1192 Laminated safety glass for vehicles
SANS 1193 Toughened safety glass for vehicles

Test Items: 
Dimensions and tolerances, Light transmission, Secondary image, Boil test, Radiation test, Tests for fracture and adhesion and impact resistance, Humidity test, Refractive index, Optional distortion,Radiation, High temperature test, Elastic performance test, Headform test, Abrasive resistance test, Flatness,Fragmentation test

Multinational Homologation Solutions
ATIC provides more than 28 categories' system, separate technical unit, component multinational compliance and homologation solutions

Europe, the United States, Japan, Korea, China and India have a comprehensive electric vehicle homologation system. Emerging markets such as the Middle East, Indonesia, and Thailand are gradually developing electric vehicle standards. Our service includes multinational regulations identification, comparison, training and Q&A.

CNG/LPG Components
Many countries established regulations and homologation procedures for clean energy applications. ATIC team has accumulated many years homologation experience in this area. We are now providing comprehensive services including multinational regulations identification, regulation comparison, training, Q&A, testing and homologation.

Brake system components such as brake lining, brake pads and shoes, brake discs are critical safety components. Most countries established compulsory certification scheme for both original and replacement parts. Our market access solution including regulation consulting, training, testing and certification covering all the relevant countries/regions world wide.

Tires are required for mandatory certification in many countries. Besides safety testing, many countries are introducing labelling requirements with regard to the display of information on the fuel efficiency, wet grip and external rolling noise of tires. ATIC provides multinational consulting and homologation services for tires, especially for emerging markets.

In-vehicle communication system is more and more important in internet of vehicle systems. Both automotive and telecom regulations need to be considered. Relying on our professional team and regulation database ATIC provides in-vehicle communication system homologation, training and consulting services covering more than 17 countries.

CNG/LPG Components
Many countries established regulations and homologation procedures for clean energy applications. ATIC team has accumulated many years homologation experience in this area. We are now providing comprehensive services including multinational regulations identification, regulation comparison, training, Q&A, testing and homologation.