BRIEF INTRODUCTION OF EU 2018/858 DRAFT AMENDMENT

BRIEF INTRODUCTION OF EU 2018/858 DRAFT AMENDMENT

RELEASE DATE:2022-06-06 11:35
Brief: In March this year, the EU issued a draft amendment based on EU 2018/858, the definition of "Scheme I and Scheme II" was introduced for small series vehicles. For the implementation of the new regulation EU 2019/2144, a two-year transition period (July 7, 2024) is provided for the application of new type approval for small series and special purpose vehicles, and an additional two-year transition period (July 7, 2026) is provided for new vehicle’s registration.



TRANSITIONAL PROVISIONS
According to the draft amendment, for small series vehicles andspecial purpose vehicles, for the implementation of the new EU 2019/2144 regulation, a transition period of two years is provided for the application for type approval of new types (commencing on July 7, 2024), with an additional two-year transition period for new vehicle’s registration (commencing on July 7, 2026).


NEW DEFINITION IN THE DRAFT AMENDMENT
Small series scheme I apply provided that: the vehicle type is not based on or derived from a vehicle produced in large series, including those for EU or third markets; and the manufacturer’s combined number of units, of all its categories M and N vehicle types registered, made available on the market or entered into service annually in the Union does not exceed 1500.

Small series scheme II refers to situations other than those defined by "Scheme I".

It is important to note that the small series vehicles quantity limit of 1500 defined in Scheme I includes all types of M and N vehicles that the manufacturer puts into the EU market each year, not for a specific type. Scheme I limits the number of vehicles a manufacturer can put on the EU market, and also restricts the type from being a unlimited series type.


LIST OF APPLICABLE REGULATIONS FOR SCHEME II VEHICLES
For M1 vehicles produced by Chinese manufacturers and exported to the EU in small series, they generally belong to the category of Scheme II. The new GSR technical regulations applicable to Scheme II and the implementation time are shown in the table below.

No.
Regulation No.
Item
M1
N1
A21
UN R137
Frontal full-width impact 100%
New type:07/07/2024
New registration:07/07/2026
New types:07/07/2024
New registration:07/07/2026
A26
UN R135
Pole side impact
New types:07/07/2024
New registration:07/07/2026
New types:07/07/2024
New registration:07/07/2026
A27
UN R153
Rear impact
New types:07/07/2024
New registration:07/07/2026
New types:07/07/2024
New registration:07/07/2026
B4
UN R152
Advanced emergency braking on light-duty vehicles
New types:07/07/2024
New registration:07/07/2026
New types:07/07/2024
New registration:07/07/2026
B7
UN R158
Reversing detection
New types:07/07/2024
New registration:07/07/2026
New types:07/07/2024
New registration:07/07/2026
C3
(EU) 2021/646
Emergency lane keeping system
New types:07/07/2024
New registration:07/07/2026
New types:07/07/2024
New registration:07/07/2026
D8
(EU) 2021/1958
Intelligent speed assistance
New types:07/07/2024
New registration:07/07/2026
New types:07/07/2024
New registration:07/07/2026
D16
UN R48
Emergency stop signal
New types:07/07/2024
New registration:07/07/2026
New types:07/07/2024
New registration:07/07/2026
E1
(EU) 2021/1243
Alcohol interlock installation facilitation
New types:07/07/2024
New registration:07/07/2026
New types:07/07/2024
New registration:07/07/2026
E2
(EU) 2021/1341
Driver drowsiness and attention warning
New types:07/07/2024
New registration:07/07/2026
New types:07/07/2024
New registration:07/07/2026
E5
UN R160;
(EU) 2022/545
Event data recorder
New types:07/07/2024
New registration:07/07/2026
New types:07/07/2024
New registration:07/07/2026
D4
UN R155
Cyber security and cyber security management system
New types:07/07/2024
New registration:07/07/2026
New types:07/07/2024
New registration:07/07/2026
H2
UN R156
Software update and software updates management system
New types:07/07/2024
New registration:07/07/2026
New types:07/07/2024
New registration:07/07/2026

ATIC PROVIDES AUTOMOTIVE GLOBAL HOMOLOGATION SERVICE
ATIC's vehicle homologation experts have an average of more than 10 years of experience in motor vehicle certification, and are familiar with multinational certification processes, local regulations, and testing requirements. ATIC cooperates with multinational official organizations and integrates high-quality testing and certification resources, to provide a global one-stop certification service for manufacturers to complete the certification process, including certification application, documentation preparation, regulatory guidance and training, and pre-testing and test coordination, etc.

ATIC Global VEHICLE REGULATION RESEARCH & VEHICLE DEPARTMENT
ATIC Automotive Regulation Research and Vehicle Homologation Product Line is dedicated to global automotive regulation research, homologation procedure research and WVTA homologation project management.

Based on ATIC digital platform, our team provides a series of automotive compliance services including market access solutions, technical review, regulation interpretation, regulation database and update, training and Q&A, etc.

ATIC homologation experts are nominated by European technical service and authorities covering all EU/UN regulations for M/N/O/T/L/NRMM category vehicle, system, component and separate technical unit. Authorities includes Netherlands (e/E4), Sweden (e/E5), Luxembourg (e/E13), Ireland (e/E24) and Cyprus (e/E49).
ATIC is long-term compliance and homologation service provider for GWM, GEELY, SAIC MOTOR, BYD, XPENG, NIO, RIMAC, Smart etc. top domestic and international OEMs, and HUAWEI, CATL, SVOLT, FINDREAMS etc. system and component manufactures.

VEHICLE HOMOLOGATION PLEASE CONTACT
Bruce got his master's degree from Nanjing University of Technology, he is now an expert in whole vehicle performance testing, certification and regulation research for global vehicle homologation.
Bruce Chen
Vehicle Homologation Project Engineer
Bruce holds a Master's degree from Nanjing University of Technology, in ATIC, he is the professional driver & racer and type approval testing engineer
Phone: +86 020-82510156
Mail: cs@atic-cn.com