In-Vehicle Radio Device Multinational Homologation Solution
Establish a global certification program at the product development and design stage, proactively, orderly, and low-risk access to multiple target markets

Multinational Homologation Matrix - In-vehicle Radio Device
With the development of ICT technology, automobiles are moving towards the direction of so called Intelligent Connected Vehicles. By carrying advanced devices such as on-board sensors, controllers, actuators, etc., and integrating modern communication and network technologies, information exchange and sharing between vehicles, roads, people, and clouds, therefore complex environment perception, intelligent decision-making, collaborative control and other functions are realized. Many countries and regions require mandatory certification for these devices or systems.

 
 China EU USRussia Japan AustraliaKorea Indonesia
Vietnam India ThailandChile BrazilMoxico Argentina
Certification
SNI
NBTC certification
智利汽车认证 智利汽车零部件认证
SRRCRED FCCFAC MIC RCMKC SDPPI ICT WPC NBTCSUBTEL ANATELNOM ENACOM
Authority
Ministry of industry and information technology
European Union
Federal Communications Commission
Federal Agency of Communication
Ministry of Internal Affairs and Communications
Australian Communication and Media Authority
National Radio Research Agency
Directorate General of Resources and Equipment of Post and Information Technology
Ministry of Information and Communications
Ministry of Communication
National Broadcasting and Telecommunications Commission
Ministry of Transportation and Telecommunication
Brazilian Agency of Telecommunication
Mexican ministry of economy
National Communications Commission
Regulation
Radio Regulation
RED Directive 2014/53/EC
Title 47 of the Code of Federal Regulations
FEDERAL LAW NO. 126
Radio Law
Radio communications Act  1992
Radio Waves Act
Telecommunications Act
Law on Telecommunications
India Wireless Act
Radio Communication Act

Law No. 18,168
Resolution No. 715, October 23, 2019
NOM-001-SCFI
NOM-208-SCFI
NOM-211-SCFI
NOM-024-SCFI
CNC N° 82/2015, SC N° 729/80
Local Testing
Yes
No
No
No
No
No
No
No
Yes
No
No
No
Yes
Yes
Yes
Local Representative
No
No
**
**
**
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Testing Items


RF
RF, EMC, Safety
RF, EMC
RF, EMC, Safety
RF, EMC
RF, EMC
RF, EMC
RF, EMC
RF, EMC
RF
RF, EMC, Safety
RF, EMC
RF, EMC, Safety
RF, Safety
RF, EMC, Safety
** depends on the specific certification mode

Marks
ATIC | A Testing Inspection Certification Company
www.atic-cn.com
Get a Quotation Now

Submit quotation request or login to ATICTM Digital Customer Platform to view quotations, browse 16,000+ regulations and 
SoPs cover more than 54 countries, submit information documents and manage your certification projects.
b26d0674d4bfab658758711007ccc432.png

If you need an accurate quotation, please upload the English product specification and/or product model list. Please compress multiple documents into one .rar or .zip file then upload (max. 20MB). For general inquiry, ATIC will send you a quotation and procedure description within 1 working day to your email address.

Please wait...
Global Homologation Solution

ATIC CCC Certification Service

In accordance with Chinese laws and regulations, any frequency band used by any radio transmitting product sold in the Chinese market must be approved by the Radio Regulatory Commission, which is called the SRRC (State Radio Regulation of China). The entire process includes submitting test materials and samples to the SRRC Testing Center by applicant or its representative. After acceptance, the products, documentation and test reports are reviewed and inspected in accordance with the prescribed procedures, the applicant will obtain a certificate after approval.

Regulation:
Radio Regulation

Testing Items:
RF, EMC

Procedure:
Documentation and sample preparation, testing, rectification (if any), application for model approval, issuing certificates

Please click here for more Greater China certification:
ATIC EU Homologation

The European Union officially announced a new version of the Radio Equipment Directive (RED) 2014/53/EU on May 22, 2014, which is based on the new CE framework directive 768/2008/EC. After June 13, 2017, radio equipments shall be tested according to RED, and bear the CE-mark before legally sold in EU countries. RED scope covers short-range wireless products, wireless phones, ISDN, mobile phones, data transmission equipments, bluetooth products, wireless broadcast receiver equipments, etc.

Directive:
RED 2014/53/EC

Testing Items:
RF,EMC, Safety

Procedure:
Documentation and sample preparation, testing, rectification (if any), issuing certificates

Please Click here for more EU homologation:
FCC certification

To ensure the safety of radio and wired communication products, many radio applications, communication products and digital products require the Federal Communications Commission (FCC) approval before entering the US market. According to the FCC rules, there are Certification scheme and Declaration of Conformity (DoC) scheme, for the certification scheme products need to be tested in an FCC approved testing laboratory while the DoC scheme needs to provide test reports and other certificate according to the procedure for declaration.

Regulation:
Title 47 of the Code of Federal Regulations

Testing Items:
RF, EMC

Please click here for more North America certification:
俄罗斯认证

The regulatory authority of Russia telecom product certification is the Federal Communications Agency (FAC) under the Ministry of Industry and Trade of the Russian Federation, also known as FAC Certification. The certification scope includes equipment and software installed or connected to the general telecommunication network to transmit data, voice, broadcasting and any other services. FAC Certification modes includes FAC CoC and FAC DoC. If products that have obtained FAC DoC and FAC CoC want to enter other countries in the Eurasian market, they need to complete the certification procedures in accordance with the certification requirements of the corresponding countries.

Standard:
FEDERAL LAW NO. 126

Testing Items:
RF, EMC, Safety

Procedure:
Documentation and sample preparation, testing, rectification (if any), application for model approval, issuing certificates, registration

Please click here for more Russian certification:
Russia Whole Motor Vehicle and Components Type Approval
ATIC Japan Vehicle Type Approval Service

Japanese telecommunication authority is the Ministry of Internal Affairs and Communications (MIC). According to the Japanese Radio Wave Act, telecommunication products entering the Japanese market must complete MIC certification in accordance with relevant requirements. MIC certification products are divided into 3 categories: Category I devices do not require a network license or registration, such as wireless microphones, low-power devices, and low-power data transmission systems such as Wi-Fi, Bluetooth, etc. The second category includes radio devices governed by Article 27-2 of the Radio Wave Law which need to accept comprehensive license restrictions, a total of 36 products, e.g.: mobile phone (3G, LTE). The third category is a simple network approval or registration in addition to the first and second categories, a total of 98 types, e.g.: cell phone base station, amateur radio station, etc.

Regulation:
Radio Wave Law

Test Items:
RF, EMC

Procedure:
Documentation and sample preparation, testing, rectification (if any), issuing certificates, license

Please click here for more Japan certification:
ADR certification

The importation of vehicles to Australia is prohibited except in very specific circumstances. Most vehicles are imported by large manufacturers that invest substantially in research and development to ensure that every new vehicle meets minimum safety standards that maintain the safest possible environment for all road users and our community. Manufacturers wanting to import vehicles to Australia for supply must first obtain a Vehicle Type Approval.
Approved companies known as Registered Automotive Workshops (RAWs) may import a limited range of used vehicles on behalf of individuals. Individuals can also apply to import vehicles to Australia. A Vehicle Import Approval is required to import a vehicle. The vehicle will not be released from customs control by the Australian Border Force (ABF) unless it has a Vehicle Import Approval.

Before a new vehicle can be registered for the first time in Australia, it must meet the requirements of the Motor Vehicle Standards Act 1989 (the Act). The Act applies to all new vehicles - whether road motor vehicles or road trailers. Under the Act, new vehicles are required to be fitted with an identification plate (formerly known as a compliance plate). The identification plate provides a clear indication to the state or territory registering authority - and to the owner and the general public - that the vehicle is ready for use in transport on public roads in Australia.
The Road Vehicle Standards Act 2018 (RVSA) and associated Road Vehicle Standards Acts relating to consequential and transitional provisions and charges passed Parliament in late 2018. The Road Vehicle Standards Rules 2019, which cover the operational aspects of the RVSA, were made in February 2019. The RVSA will replace the existing Motor Vehicle Standards Act 1989 (MVSA) and deliver an updated and modernized system to regulate the first provision of road vehicles to the Australian market.

In Australia, the entire process from application to obtaining an Identification Plate is called Certification. The entire certification process is managed by Australian Department of Infrastructure, Transport, Regional Development and Communications.
 
The scope of vehicle certification includes: Motor Vehicles, Trailers, Tractors, Bicycles, Used Imported Cars, Special Vehicles, etc.
Component certification includes: Automotive Lamps, Rearview Mirrors, Seat Belts, Brake Hoses, Glass, Tires, Retro-reflectors, Filament Bulbs, Couplings, Seats, etc.


Regulation:
Radio Communication Act 1992

Testing Items:
RF, EMC

Procedure:
Documentation and sample preparation, testing, issuing certificates, registration

Please click here for more Australian certification:
ATIC Korea Vehicle Type Approval

According to the Korean Radio Wave Act, the certification modes for wireless communication products include: conformity certification, registration and transitional certification. The products for conformity certification include radiotelephone automatic receivers, ship radar equipments, telephones and modems. The products that need to be registered mainly include measuring instruments, industrial equipments, connectors, computer equipments & peripherals, and broadcast STBs, etc. The transitional certification mode applies to equipment that their conformity assessment standards are not yet provided. Any of the above certification shall be applied for wireless communication products entering Korean market.

Regulation:
Radio Wave Act

Test Items:
RF, EMC

Procedure:
Documentation and sample preparation, testing, issuing certificate, registration (if needed)

Please click here for more Korea certification:
Indonesia Telecom Certification

As a subordinate department of the Indonesian Ministry of Telecommunications, the Directorate General of Resources and Equipment of Post and Information Technology (SDPPI) is in charge of policy making and supervision of telecommunications and related fields. It is also responsible for document review and certification. Whether it is produced in Indonesia or imported into Indonesia, telecommunication products shall obtain SDPPI certificates before entering the market. The purpose of SDPPI certification is to make the product more reliable and safe throughout the society. Sample testing must be performed by SDPPI authorized laboratories. The certification scope covers cellular mobile devices, Bluetooth, laptops, mobile phones, WLAN, routers, radar, STBs, wireless phones, antennas, cables, etc.

Regulation:
Law of the Republic of Indonesia No. 36, 1999

Test Items:
RF, EMC

Procedure:
Documentation and sample preparation, testing, rectification (if any), issuing certificates

Please click here for more Indonesia certification:
Indonesia Whole Motor Vehicle Type Approval
ATIC Vietnam Vehicle Type Approval Serivce

Telecommunication products manufactured in Vietnam and other countries must be homologated following the mandatory certification scheme published by the Ministry of Information and Communication (MIC) of Vietnam and printed with ICT conformity mark before entering the Vietnamese market. The Vietnam Telecommunication Authority (VNTA) is assigned by MIC as a designated certification body (OCD) in charge of the certification and declaration of conformity. The ICT conformity mark makes the product more reliable and safer for the society.

The telecommunication products are classified into Category I and Category II, respectively need follow Type Approval & Declaration of Conformity and Declaration of Conformity procedures.

Regulation: 
Circular 05/2019/TT-BTTTT

Test Items:
RF, EMC

Procedure:
Documentation and sample preparation, testing, rectification (if any), issuing certificates, Registration

Please click here for more Vietnam certification:

Vietnam Vehicle and Component VR Certification

821e52f4085d629cdf134c79c788e01b

The Wireless Planning and Coordination (WPC) Wing of the Ministry of Communications, created in 1952, is the National Radio Regulatory Authority responsible for Frequency Spectrum Management, including licensing and caters for the needs of all wireless users (Government and Private) in the country. The approvals issued by WPC include: Equipment Type Approval (ETA), Type Approval, Experimental Approval, Dealer and non-Dealer Possession Licenses (DPL and NDPL) and Import Licenses for radio equipment. For foreign producers, however, in most cases only the ETA is relevant. WPC certification is used abroad as a synonym for ETA.

Regulation:
India Wireless Act

Test Items:
RF


Procedure:
Documentation and sample preparation, testing, rectification (if any), issuing certificates, License

Please click here for more India certification:

泰测泰国整车认证

National Broadcasting and Telecommunications Commission (NBTC) is an independent national telecom authority in Thailand. Its duties and responsibilities are to regulate all telecommunication services in the country through formulating a Master Plan on Telecommunications Activities, setting criteria and categories of telecommunication services, permitting and regulating the use of spectrum for telecommunication services, and granting licenses to the telecommunications operators. Telecom equipments subjected to NTC or NBTC’s scope are divided into 3 groups: Registration, Type Approval and Supplier’s Declaration of Conformity (SDoC).

Regulation:
Organization Act for Allocating Spectrum and Regulating Radio and Television Broadcasting Business And Telecommunications Business B.E. 2019

Test Items:
RF, EMC, Safety

Procedure:
Documentation and sample preparation, testing, rectification (if any), register (if applicable), issue certificate (if applicable)

Please click here for more Thailand certification:

Thailand Whole Vehicle Type Approval and Components Certification

Thailand Consumer TISI Certification

Thailand Telecommunication NBTC Certification

98a46b3be4f402f632945d089d893d02-400x243

SUBTEL (Subsecretaría de Telecomunicaciones) is an agency affiliated with the Ministry of Transport and Telecommunications of Chile. It aims to coordinate, promote and develop the telecommunications industry in Chile, propose national policies on telecommunications, and monitor the compliance of public and private companies in the industry with relevant laws, regulations and standards. Products under its supervision require approval and certification before commercialized in Chile. In most cases, Chile does not require sample testing and existing test reports can be used for the certification process. Technical documents will be reviewed and confirmed during the approval process. The test results for the FCC and CE are directly recognized.

Regulation: 
SUBTEL 1985/2017 Regulation

Test Items:
RF, EMC

Procedure:
Documentation and sample preparation, testing, rectification (if any), issuing certificates

Please click here for more Chile certification:

Chile Whole Vehicle and Components Type Approval

ATIC Brazilian ANATEL Certificate For Telecommunication Device

The Brazilian National Agency of Telecommunications (ANATEL) is a special authority created by the general telecommunications law and the ANATEL conformity mark makes the product more reliable and safer for the society. Product manufactured in Brazil and other countries must be homologated by ANATEL prior to sales into the Brazilian market.

Regulation:
Resolution No. 715, October 23, 2019

Test Items:
RF, EMC, Safety

Procedure:
Documentation and sample preparation, testing, rectification (if any), issuing certificate, registration

Please click here for more Brazilian certification:
89d11b55d1c5e11f879c90af5925f4dc-400x229

The Mexican government formulates relevant standards for various products according to the Mexican Federal Metrology and Standardization Law. In addition to the formulation and revision of various product standards, the Mexican Ministry of Economy is also responsible for the recognition and authorization of product certification agencies and laboratories. 

The Norma Oficial Mexicana - NOM standards are mandatory, at present, Mexico has established a relatively complete NOM certification system for limited product categories, including electronic, electrical, communication products, lighting devices, medical equipment, tires, toys, and battery-driven products.

The authority for telecommunication products is the The Federal Telecommunications Institute (IFT) which is an independent government agency that is responsible for regulating telecommunication and broadcasting services. Certified telecommunication products shall bear the IFETEL label.

Regulation:
NOM-001-SCFI,NOM-208-SCFI,NOM-211-SCFI,NOM-024-SCFI

Test Items:
RF, Safety

Procedure:
Documentation and sample preparation, testing, rectification (if any), issuing certificate

Please click here for more Mexico certification:

Mexico whole vehicle type approval and components certification

Argentina Component Type Approval

The Enacom (Ente Nacional de Comunicaciones) is an autarkic and decentralized entity that functions within the scope of the Headquarters of the Cabinet of Ministers of the Nation. Its objective is to lead the process of technological convergence and create stable market conditions to guarantee access for all Argentines to internet, fixed and mobile telephony, radio, postal and television services.

One of Enacom's main functions is to approve both equipment that makes use of the electromagnetic spectrum (including broadcasting), as well as those for specific use in communications that connect to public networks. To do this, it complies with the following activities related, not only to the registration of equipment, but also to the companies that manufacture and / or market them in the country.

Standard:
CNC N° 82/2015, SC N° 729/80

Test Items:
RF, EMC

Procedure:
Documentation and sample preparation, testing, rectification (if any), issuing certificates

Please click here for more Argentina certification:

Multinational Homologation Solutions
ATIC provides more than 28 categories' system, separate technical unit, component multinational compliance and homologation solutions

Europe, the United States, Japan, Korea, China and India have a comprehensive electric vehicle homologation system. Emerging markets such as the Middle East, Indonesia, and Thailand are gradually developing electric vehicle standards. Our service includes multinational regulations identification, comparison, training and Q&A.

CNG/LPG Components
Many countries established regulations and homologation procedures for clean energy applications. ATIC team has accumulated many years homologation experience in this area. We are now providing comprehensive services including multinational regulations identification, regulation comparison, training, Q&A, testing and homologation.

Brake system components such as brake lining, brake pads and shoes, brake discs are critical safety components. Most countries established compulsory certification scheme for both original and replacement parts. Our market access solution including regulation consulting, training, testing and certification covering all the relevant countries/regions world wide.

Tires are required for mandatory certification in many countries. Besides safety testing, many countries are introducing labelling requirements with regard to the display of information on the fuel efficiency, wet grip and external rolling noise of tires. ATIC provides multinational consulting and homologation services for tires, especially for emerging markets.

In-vehicle communication system is more and more important in internet of vehicle systems. Both automotive and telecom regulations need to be considered. Relying on our professional team and regulation database ATIC provides in-vehicle communication system homologation, training and consulting services covering more than 17 countries.

CNG/LPG Components
Many countries established regulations and homologation procedures for clean energy applications. ATIC team has accumulated many years homologation experience in this area. We are now providing comprehensive services including multinational regulations identification, regulation comparison, training, Q&A, testing and homologation.