Motor Vehicle Brake Components Global Homologation SolutionEstablish a global certification program at the product development and design stage, proactively, orderly, and low-risk access to multiple target markets
Motor Vehicle Brake Components Global Homologation Solution
Establish a global certification program at the product development and design stage, proactively, orderly, and low-risk access to multiple target markets
Global Homologation Matrix - Brake ComponentsMotor Vehicle Brake Components are one of the most important safety components of motor vehicles, and their performance is critical to vehicle safety. In order to ensure vehicle safety and road traffic safety, many countries around the world have mandatory certification requirements.
Global Homologation Matrix - Brake Components
Motor Vehicle Brake Components are one of the most important safety components of motor vehicles, and their performance is critical to vehicle safety. In order to ensure vehicle safety and road traffic safety, many countries around the world have mandatory certification requirements.
| China | China | EU | USA | Japan | Australia | South Korea | Philippines |
Vietnam | India | UAE | Brazil | EAEU | Argentina | ||
Certification |
 | |  |
 |
|
 |
 |  |
 |
 |
 |
 |
 |  |
 |
| CCC | CQC | EMARK | DOT | AMECA | JIS | ADR | KC | BPS | VR | CMVR | ESMA | INMETRO | EAC | CHAS | |
|
Authority
|
Certification and Accreditation Administration of the People's Republic of China | China Quality Certification Centre | Ministry of Transportation of member states of 1958 Agreement |
Department of Transportation |
Automotive Manufacturers Equipment Compliance Agency |
Japan Ministry of Economy, Trade and Industry |
Department of Infrastructure, Transport, Cities and Regional Department | Korea Ministry of Land, Infrastructure and Transport |
Bureau of Philippine Standards |
Vietnam Ministry of Transportation |
Ministry of Road Transport and Highways |
Emirates Authority for Standardization and Metrology |
National Institute of Metrology, Standardization and Industrial Quality | Eurasian Economic Union |
Argentine Ministry of Industry |
|
Testing Location
|
China | China | China / Europe |
China / US |
China / US |
Japan |
China | Korea |
China / Philippines |
Vietnam |
India |
China |
China | China / Russia |
China / Argentina |
|
Conformity of Production
|
Initial Audit + Surveillance Audit | Initial Assessment + CoP | Initial Assessment + CoP |
None |
None |
Initial Assessment + CoP |
Possible Factory Audit | None |
Initial Audit + Surveillance Audit |
Initial Audit + Surveillance Audit |
Initial Assessment + CoP |
None |
Initial Audit + Surveillance Audit | Initial Assessment + CoP |
Initial Assessment + CoP |
|
Regulation / Standard
|
GB 5763 | GB 16897 | ECE R90 ECE R13 ECE R13H ECE R78 |
FMVSS 106 FMVSS 116 SAE J 1288-2005 SAE J 1401-2003 SAE J 1402-2006 SAE J 1403-2005 SAE J 1406-2007 SAE J 1873-2003 SAE J 75-2006 SAE J 291-1980 SAE J 1703-2008 SAE J 1704-2008 SAE J 1705-2007 SAE J 1706-1995 SAE J 1707-2002 |
FMVSS 106 FMVSS 116 VESC V-3 SAE J 1288-2005 SAE J 1401-2003 SAE J 1402-2006 SAE J 1403-2005 SAE J 1406-2007 SAE J 1873-2003 SAE J 75-2006 SAE J 291-1980 SAE J 1703-2008 SAE J 1704-2008 SAE J 1705-2007 SAE J 1706-1995 SAE J 1707-2002 |
JISD4413 JISD4414-1 JISD4414-2 JISD4415 JISD4416 JISD4417 JISD4418 JISD4419 JISD4420 JISD4421 JISD4422 JISK2233 JISD2601 |
ADR 42 | KMVSS Article 112-2 KMVSS Article 112 -10 National Technical Standards Notice No. 2017-032 |
PNS 239/MVSS 116:1988 |
22TCN 296-02 TCVN 11496-2016 TCVN 11497-2016 TCVN 11498-2016 TCVN 11499-2016 TCVN 11500-2016 TCVN 11501-2016 TCVN 11502-2016 TCVN 11503-2016 TCVN 11496-2016 TCVN 6822-2001 TCVN 6823-2001 TCVN 7237-2003 TCVN 7236-2003 TCVN 7235-2003 |
AIS-061 IS 7079-2008 |
UAE.S/GSO ECE 90 UAE.S GSO ECE 13-1 UAE.S GSO ECE 13-2 UAE.S GSO ECE 13-3 UAE.S GSO ECE 13-4 UAE.S GSO ECE 13-5 UAE.S GSO ECE 13-6 UAE.S GSO ECE 13H |
Ordinance no. 145/2022 Ordinance no. 456/2021 | TR TS 030/2012 |
IRAM AITA 6-C2 IRAM AITA, 6H1, 6H2, 6H3, 6H4, 6H5, 6H10 |
Components | Brake lining | Brake hose (hydraulic / pneumatic / vacuum) | Brake lining, Brake drum and brake disc | Brake fluids, Brake hose (hydraulic / pneumatic / vacuum) | Brake lining, Brake fluids, Brake hose (hydraulic / pneumatic / vacuum) | Brake lining, Brake fluids, Brake hose (hydraulic) | Brake hose (hydraulic / pneumatic / vacuum) | Brake lining, Brake Fluids, Brake hose (hydraulic / pneumatic / vacuum) | Brake fluids | Motorcycle brake hose | Brake lining, Brake hose (hydraulic) | Brake lining, Brake drum and brake disc | Brake lining, Brake fluids | Brake fluids | Brake lining, Brake fluids |
|
Main test items *The specific test items may different for different product categories or specifications. |
Brake lining Asbestos detection Harmful elements detection Friction performance test Shear strength test | Brake hose Expansion test Burst strength test Anti-jitter test Tensile strength test Water absorption sequence tests Low temperature resistance test Brake fluid compatibility test Ozone resistance test Dynamic ozone test High temperature impulse test End fitting corrosion test Constriction test | 1) Brake lining Brake testing
Cold performance equivalence test Speed sensitivity test Mechanical characteristics Test-Shear strength, Compressibility, friction coefficient 2) Brake drum and brake disc Geometric requirements Performance tests according to Regulations No. 13/13-H Comparison test with dynamic frictional properties of the original part High load and thermal fatigue test |
1) Motor Vehicle Brake Fluids Equilibrium reflux boiling point
Wet ERBP Kinematic viscosities pH value Fluid stability Corrosion Fluidity and appearance at low temperatures Water tolerance Compatibility Resistance to oxidation Effect on SBR cups Stroking properties Container information 2) brake hose-hydraulic, pneumatic, vacuum Expansion test Burst strength test Whip resistance test Tensile strength test Water absorption sequence tests Low temperature resistance test Brake fluid compatibility test Ozone resistance test Dynamic ozone test High temperature impulse test End fitting corrosion test Constriction test etc. |
1) Brake Linings Baseline Run
First Run Wear run Second Run Baseline Rerun 2) Motor Vehicle Brake Fluids Equilibrium reflux boiling point Wet ERBP Kinematic viscosities pH value Fluid stability Corrosion Fluidity and appearance at low temperatures Water tolerance Compatibility Resistance to oxidation Effect on SBR cups Stroking properties Container information 3) brake hose-hydraulic, pneumatic, vacuum Expansion test Burst strength test Whip resistance test Tensile strength test Water absorption sequence tests Low temperature resistance test Brake fluid compatibility test Ozone resistance test Dynamic ozone test High temperature impulse test End fitting corrosion test Constriction test etc. |
1) Brake Linings
Compressive strain test Anti-rust test Shear strength test Thermal expansion test Hardness Testing Shear test 2) Motor Vehicle Brake Fluids Equilibrium reflux boiling point Wet ERBP Kinematic viscosities pH value Fluid stability Corrosion Fluidity and appearance at low temperatures Water tolerance Compatibility Resistance to oxidation Effect on SBR cups Stroking properties Container information 3) Hydraulic brake hose Expansion test Burst strength test Whip resistance test Tensile strength test Water absorption sequence tests Low temperature resistance test Brake fluid compatibility test Ozone resistance test Dynamic ozone test High temperature impulse test End fitting corrosion test Constriction test |
1) brake hose-hydraulic, pneumatic, vacuum Expansion test
Burst strength test Whip resistance test Tensile strength test Water absorption sequence tests Low temperature resistance test Brake fluid compatibility test Ozone resistance test Dynamic ozone test High temperature impulse test End fitting corrosion test Constriction test High temperature resistance test Oil resistance test Length change test Flex strength and air pressure test. Corrosion resistance and burst strength test Water Absorption and tensile strength test Zinc chloride resistance test Vacuum test Bend test Swell and adhesion test Deformation test | 1) Brake Linings
Compressibility test Shear strength test Hardness Testing 2) Motor Vehicle Brake Fluids Equilibrium reflux boiling point Wet ERBP Kinematic viscosities pH value Fluid stability Corrosion Fluidity and appearance at low temperatures Water tolerance Compatibility Resistance to oxidation Effect on SBR cups Stroking properties Container information 3) brake hose-hydraulic, pneumatic, vacuum Expansion test Burst strength test Whip resistance test Tensile strength test Water absorption sequence tests Low temperature resistance test Brake fluid compatibility test Ozone resistance test Dynamic ozone test High temperature impulse test End fitting corrosion test Constriction test etc. |
1) Motor Vehicle Brake Fluids
Equilibrium reflux boiling point Wet ERBP Kinematic viscosities pH value Fluid stability Corrosion Fluidity and appearance at low temperatures Water tolerance Compatibility Resistance to oxidation Effect on SBR cups Stroking properties Container information |
1) Motorcycle brake hose
Tolerance for length Requirement of fitting Installation of cap and cove Threaded joints requirement Length of patchwork and lead holding material Surface defects Conductor surface requirements Installation of protective covers Slip resistance Control performance Durability |
1) Brake lining
Brake testing Cold performance equivalence test Speed sensitivity test Mechanical characteristics Test-Shear strength, Compressibility, friction coefficient 2) Hydraulic brake hose Expansion test Burst strength test Whip resistance test Tensile strength test Water absorption sequence tests Low temperature resistance test Brake fluid compatibility test Ozone resistance test Dynamic ozone test High temperature impulse test End fitting corrosion test Constriction test |
1) Brake lining
Brake testing Cold performance equivalence test Speed sensitivity test Mechanical characteristics Test-Shear strength, Compressibility, friction coefficient 2) Brake drum and brake disc Geometric requirements Performance tests according to Regulations No. 13/13-H Comparison test with dynamic frictional properties of the original part high load and thermal fatigue test |
1) Brake Linings
Shear test Dilation and growth Asbestos detection Hot compressibility Compressibility ambient temperature Hot compressibility 2) Motor Vehicle Brake Fluids Equilibrium reflux boiling point Wet ERBP Kinematic viscosities pH value Fluid stability Corrosion Fluidity and appearance at low temperatures Water tolerance Compatibility Resistance to oxidation Effect on SBR cups Stroking properties | 1) Motor Vehicle Brake Fluids
Equilibrium reflux boiling point Wet ERBP Kinematic viscosities pH value Fluid stability Corrosion Fluidity and appearance at low temperatures Water tolerance Compatibility Resistance to oxidation Effect on SBR cups Stroking properties Container information |
1) Brake lining Brake testing
Cold performance equivalence test Speed sensitivity test Mechanical characteristics Test-Shear strength, Compressibility, friction coefficient 2) Motor Vehicle Brake Fluids Equilibrium reflux boiling point Wet ERBP Kinematic viscosities pH value Fluid stability Corrosion Fluidity and appearance at low temperatures Water tolerance Compatibility Resistance to oxidation Effect on SBR cups Stroking properties Container information |
 ATIC | A Testing Inspection Certification Company www.atic-cn.com | |||||||||||||||
Get a Quotation Now
Submit quotation request or login to ATICTM Digital Customer Platform to view quotations, browse 16,000+ regulations and
SoPs cover more than 54 countries, submit information documents and manage your certification projects.
Global Homologation Solution
China Compulsory Certification (also known as CCC certification) is the compulsory product certification in China. According to the requirements of CNCA (Certification and Accreditation Administration of the People’s Republic of China), all products listed in the compulsory product certification catalog which does not obtain a certificate or apply certification marks in accordance with regulations, shall not be imported, shipped from the factory, or enter into Chinese market.
The State Administration for Market Regulation issued Announcement No. 19 of 2020 to convert the brake lining from production license to mandatory certification scheme (CCC certification). Brake linings for automobiles will be subject to mandatory CCC certification from June 1, 2020. CNCA-C11-20: 2020 CNCA implementation rules for compulsory product certification of automotive brake linings has been released. The basic certification procedure includes: initial factory audit, sample testing, surveillance. Surveillance activity includes three methods: follow-up inspection after certification, sampling or inspection at the production site, and market sampling inspection or inspection.
The State Administration for Market Regulation issued Announcement No. 19 of 2020 to convert the brake lining from production license to mandatory certification scheme (CCC certification). Brake linings for automobiles will be subject to mandatory CCC certification from June 1, 2020. CNCA-C11-20: 2020 CNCA implementation rules for compulsory product certification of automotive brake linings has been released. The basic certification procedure includes: initial factory audit, sample testing, surveillance. Surveillance activity includes three methods: follow-up inspection after certification, sampling or inspection at the production site, and market sampling inspection or inspection.
Standards:
GB 5763
Test Items:
Asbestos detection, Harmful elements detection, Friction performance test, Shear strength test
Procedure:
Application documents preparation, factory audit, sample tests, certificate issuance, surveillance
Please click here for more certification:
The CQC mark is applied to indicate that the products meet the relevant quality, safety, performance, electromagnetic compatibility and other certification requirements. The certification scope covers more than 500 products including mechanical equipment, electrical equipment, electrical appliances, electronic products, textiles, and building materials. The CQC mark certification focuses on safety, electromagnetic compatibility, performance, hazardous substance limits and other indicators that directly reflect product quality and affect the personal and property safety of consumers. It is designed to protect consumer interests, promote product quality, and enhance the international competitiveness of domestic enterprises.
Motor vehicle brake hoses were once in the scope of CCC compulsory certification, and were certified according to the CNCA-C11-06 Motor Vehicle Brake Hose Compulsory Product Certification Implementation Rules. According to the Announcement No. 11 of 2018 issued by the State Administration for Market Regulation of China in June 2018, the brake hoses for motor vehicles have been removed from the scope of compulsory certification products, and compulsory certification is no longer conducted.
Although motor vehicle brake hoses no longer require CCC compulsory certification, manufacturers can consider CQC mark certification (voluntary certification) as appropriate. China Quality Certification Center (CQC) has included motor vehicle brake hoses in the scope of CQC mark certification, and according to CQC16-491284-2018 motor vehicle brake hose implementation rules to certify it. In addition to brake hoses, M-type and N-type vehicle brake assemblies and automotive dual-chamber hydraulic brake master cylinder assemblies can also undergo voluntary CQC mark certification to enhance brand value.
Standards:
GB 16897
Test Items:
Expansion test, Burst strength test, Anti-jitter test, Tensile strength test, Water absorption sequence tests, Low temperature resistance test, Brake fluid compatibility test, Ozone resistance test, Dynamic ozone test, High temperature impulse test, End fitting corrosion test, Constriction test
Procedure:
Application documents preparation, factory audit, sample tests, certificate issuance, surveillance
Please click here for more certification:
Focusing on road safety, environmental protection and public health, people may mention three sets of famous regulations when they talk about European Type Approval System: German StVZO, EU Regulations and UN Regulations. StVZO standards apply to Germany, EU Regulations apply to EU/EEA/EFTA member states, while UN Regulations may accepted by EU and more than 50 UNECE member states.
Regulation:
ECE R90, ECE R13, ECE R13H, ECE R78
Brake Lining/Shoe Test Items:
Brake Lining/Shoe Test Items:
Brake testing, Cold performance equivalence test, Speed sensitivity test, Mechanical characteristics, Shear strength, Compressibility, Friction coefficient
Brake Disc/Drum Test Items:
Geometric requirements, Performance tests according to Regulations No. 13/13-H, Comparison tests with dynamic frictional properties of the original part, High load and thermal fatigue tests
Procedure:
Prepare information document, initial assessment, witness test, approval, conformity of production
Please Click here for more EU Certification:
The United States Department of Transportation, abbreviated DOT, is headquartered in Washington. As the functional department of the US government, the US Department of Transportation develops and improves transportation and transportation-related regulations to meet environmental and national defense needs. The Department of Transportation is also a basic department of the federal government, responsible for formulation and management to protect and improve the safety, appropriateness and effectiveness of transportation system. According to the regulations of the US Department of Transportation, where vehicles and critical components are exported to the US market, they must pass DOT certification and mark the corresponding DOT mark on the product. The product has passed the DOT certification and is marked with the corresponding mark, indicating that the product meets the requirements of the Federal Motor Vehicle Safety Standard (FMVSS) and has passed the corresponding test or manufacturer's statement.
Standards:
FMVSS 106, FMVSS 116, SAE J 1288-2005, SAE J 1401-2003, SAE J 1402-2006, SAE J 1403-2005, SAE J 1406-2007, SAE J 1873-2003, SAE J 75-2006, SAE J 291-1980, SAE J 1703-2008, SAE J 1704-2008, SAE J 1705-2007, SAE J 1706-1995, SAE J 1707-2002
Motor Vehicle Brake Fluids Testing Items:
Equilibrium reflux boiling point, Wet ERBP, Kinematic viscosities, pH value, Fluid stability, Corrosion, Fluidity and appearance at low temperatures, Water tolerance, Compatibility, Resistance to oxidation, Effect on SBR cups, Stroking properties, Container information
Brake Hose (Hydraulic/Pneumatic/Vacuum) Testing Items:
Expansion test, Burst strength test, Whip resistance test, Tensile strength test, Water absorption sequence tests, Low temperature resistance test, Brake fluid compatibility test, Ozone resistance test, Dynamic ozone test, High temperature impulse test, End fitting corrosion test, Constriction test, etc.,
Procedure:
Testing, DOT marking, registration to NHTSA
Please click here for more North America certifications:
The North American Parts Compliance Program (ECP) promoted by AMECA (The Automotive Manufacturers Equipment Compliance Agency, Inc.) is a centralized, voluntary, one-stop process. It is a procedure for informing the government, industry and the general public that motor vehicle safety components have been tested in AMECA authorized laboratories and that they meet relevant standards. Products with an AMECA certificate will be more easily procured by North American buyers and users. AMECA provides product testing related services by authorizing third-party laboratories. Only test reports issued by AEMCA authorized laboratories will be approved by AMECA.
Standard:
FMVSS 106, FMVSS 116, VESC V-3 , SAE J 1288-2005, SAE J 1401-2003, SAE J 1402-2006, SAE J 1403-2005, SAE J 1406-2007, SAE J 1873-2003, SAE J 75-2006, SAE J 291-1980, SAE J 1703-2008, SAE J 1704-2008, SAE J 1705-2007, SAE J 1706-1995, SAE J 1707-2002
Brake Lining Testing Items:
Baseline run, First run, Wear run , Second run, Baseline rerun
Baseline run, First run, Wear run , Second run, Baseline rerun
Motor Vehicle Brake Fluids Testing Items:
Equilibrium reflux boiling point, Wet ERBP, Kinematic viscosities, pH value, Fluid stability, Corrosion, Fluidity and appearance at low temperatures, Water tolerance, Compatibility, Resistance to oxidation, Effect on SBR cups, Stroking properties, Container information
Equilibrium reflux boiling point, Wet ERBP, Kinematic viscosities, pH value, Fluid stability, Corrosion, Fluidity and appearance at low temperatures, Water tolerance, Compatibility, Resistance to oxidation, Effect on SBR cups, Stroking properties, Container information
Brake Hose (Hydraulic/Pneumatic/Vacuum) Testing Items:
Expansion test, Burst strength test, Whip resistance test, Tensile strength test, Water absorption sequence tests, Low temperature resistance test, Brake fluid compatibility test, Ozone resistance test, Dynamic ozone test, High temperature impulse test, End fitting corrosion test, Constriction test, etc.
Procedure:
Application, testing, certificate issuance
Please click here for more North America certifications:
The Japanese Industrial Standards Committee (JISC), Japan's national standardization body, plays a central role in developing standards in Japan covering a wide range of products and technologies from robots to pictograms. JISC is also responsible for Japan's growing contribution to setting international standards through its work with the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC).
Japanese Industrial Standards (JIS) covers industrial and mineral products, data, services and management systems under the Industrial Standardization Act.
Businesses that receive certificates of conformity from accredited certification bodies are eligible to display the JIS Mark on their products, electromagnetic record provision documents or service provision documents, etc. All certification bodies accredited for the JIS marking system must be compliant with ISO/IEC 17065. The certification process consists of two elements: evaluation of the conformity of products, electromagnetic records, or services with the relevant JIS, and the evaluation of the quality management system. As of March 2019, there are 24 JIS-accredited certification bodies, including three outside of Japan, which have issued about 8,700 certifications for JIS Marks.
Standards:
JISD4413, JISD4414-1, JISD4414-2, JISD4415, JISD4416, JISD4417, JISD4418, JISD4419, JISD4420, JISD4421, JISD4422, JISK2233, JISD2601
Japanese Industrial Standards (JIS) covers industrial and mineral products, data, services and management systems under the Industrial Standardization Act.
Businesses that receive certificates of conformity from accredited certification bodies are eligible to display the JIS Mark on their products, electromagnetic record provision documents or service provision documents, etc. All certification bodies accredited for the JIS marking system must be compliant with ISO/IEC 17065. The certification process consists of two elements: evaluation of the conformity of products, electromagnetic records, or services with the relevant JIS, and the evaluation of the quality management system. As of March 2019, there are 24 JIS-accredited certification bodies, including three outside of Japan, which have issued about 8,700 certifications for JIS Marks.
Standards:
JISD4413, JISD4414-1, JISD4414-2, JISD4415, JISD4416, JISD4417, JISD4418, JISD4419, JISD4420, JISD4421, JISD4422, JISK2233, JISD2601
Brake Lining Test Items:
Compressive strain test, Anti-rust test, Shear strength test, Thermal expansion test, Hardness test, Shear test
Compressive strain test, Anti-rust test, Shear strength test, Thermal expansion test, Hardness test, Shear test
Brake Fluids Test Items:
Equilibrium reflux boiling point, Wet ERBP, Kinematic viscosities, pH value, Fluid stability, Corrosion, Fluidity and appearance at low temperatures, Water tolerance, Compatibility, Resistance to oxidation, Effect on SBR cups, Stroking properties, Container information
Equilibrium reflux boiling point, Wet ERBP, Kinematic viscosities, pH value, Fluid stability, Corrosion, Fluidity and appearance at low temperatures, Water tolerance, Compatibility, Resistance to oxidation, Effect on SBR cups, Stroking properties, Container information
Hydraulic Brake Hose Test Items:
Expansion test, Burst strength test, Whip resistance test, Tensile strength test, Water absorption sequence tests, Low temperature resistance test, Brake fluid compatibility test, Ozone resistance test, Dynamic ozone test, High temperature impulse test, End fitting corrosion test, Constriction test
Expansion test, Burst strength test, Whip resistance test, Tensile strength test, Water absorption sequence tests, Low temperature resistance test, Brake fluid compatibility test, Ozone resistance test, Dynamic ozone test, High temperature impulse test, End fitting corrosion test, Constriction test
Please click here for more Japan certifications:
The importation of vehicles to Australia is prohibited except in very specific circumstances. Most vehicles are imported by large manufacturers that invest substantially in research and development to ensure that every new vehicle meets minimum safety standards that maintain the safest possible environment for all road users and our community. Manufacturers wanting to import vehicles to Australia for supply must first obtain a Vehicle Type Approval.
Approved companies known as Registered Automotive Workshops (RAWs) may import a limited range of used vehicles on behalf of individuals. Individuals can also apply to import vehicles to Australia. A Vehicle Import Approval is required to import a vehicle. The vehicle will not be released from customs control by the Australian Border Force (ABF) unless it has a Vehicle Import Approval.
Before a new vehicle can be registered for the first time in Australia, it must meet the requirements of the Motor Vehicle Standards Act 1989 (the Act). The Act applies to all new vehicles - whether road motor vehicles or road trailers. Under the Act, new vehicles are required to be fitted with an identification plate (formerly known as a compliance plate). The identification plate provides a clear indication to the state or territory registering authority - and to the owner and the general public - that the vehicle is ready for use in transport on public roads in Australia.
The Road Vehicle Standards Act 2018 (RVSA) and associated Road Vehicle Standards Acts relating to consequential and transitional provisions and charges passed Parliament in late 2018. The Road Vehicle Standards Rules 2019, which cover the operational aspects of the RVSA, were made in February 2019. The RVSA will replace the existing Motor Vehicle Standards Act 1989 (MVSA) and deliver an updated and modernized system to regulate the first provision of road vehicles to the Australian market.
In Australia, the entire process from application to obtaining an Identification Plate is called Certification. The entire certification process is managed by Australian Department of Infrastructure, Transport, Regional Development and Communications.
The scope of vehicle certification includes: Motor Vehicles, Trailers, Tractors, Bicycles, Used Imported Cars, Special Vehicles, etc.
Component certification includes: Automotive Lamps, Rearview Mirrors, Seat Belts, Brake Hoses, Glass, Tires, Retro-reflectors, Filament Bulbs, Couplings, Seats, etc.
Standard:
ADR7, ADR42
Approved companies known as Registered Automotive Workshops (RAWs) may import a limited range of used vehicles on behalf of individuals. Individuals can also apply to import vehicles to Australia. A Vehicle Import Approval is required to import a vehicle. The vehicle will not be released from customs control by the Australian Border Force (ABF) unless it has a Vehicle Import Approval.
Before a new vehicle can be registered for the first time in Australia, it must meet the requirements of the Motor Vehicle Standards Act 1989 (the Act). The Act applies to all new vehicles - whether road motor vehicles or road trailers. Under the Act, new vehicles are required to be fitted with an identification plate (formerly known as a compliance plate). The identification plate provides a clear indication to the state or territory registering authority - and to the owner and the general public - that the vehicle is ready for use in transport on public roads in Australia.
The Road Vehicle Standards Act 2018 (RVSA) and associated Road Vehicle Standards Acts relating to consequential and transitional provisions and charges passed Parliament in late 2018. The Road Vehicle Standards Rules 2019, which cover the operational aspects of the RVSA, were made in February 2019. The RVSA will replace the existing Motor Vehicle Standards Act 1989 (MVSA) and deliver an updated and modernized system to regulate the first provision of road vehicles to the Australian market.
In Australia, the entire process from application to obtaining an Identification Plate is called Certification. The entire certification process is managed by Australian Department of Infrastructure, Transport, Regional Development and Communications.
The scope of vehicle certification includes: Motor Vehicles, Trailers, Tractors, Bicycles, Used Imported Cars, Special Vehicles, etc.
Component certification includes: Automotive Lamps, Rearview Mirrors, Seat Belts, Brake Hoses, Glass, Tires, Retro-reflectors, Filament Bulbs, Couplings, Seats, etc.
Standard:
ADR7, ADR42
Brake Hose (Hydraulic/Pneumatic/Vacuum) Test Items:
Expansion test, Burst strength test, Whip resistance test, Tensile strength test, Water absorption sequence tests, Low temperature resistance test, Brake fluid compatibility test, Ozone resistance test, Dynamic ozone test, High temperature impulse test, End fitting corrosion test, Constriction test, High temperature resistance test, Oil resistance test, Length change test, Flex strength and air pressure test, Corrosion resistance and burst strength test, Water Absorption and tensile strength test, Zinc chloride resistance test, Vacuum test, Bend test, Swell and adhesion test, Deformation test
Procedure:
Prepare information document, sample testing, submit registration
Please click here for more Australia certification:
Australia Motor Vehicle Certification
Australia Child Restraint System Certification
New Zealand Motor Vehicle Type Approval
Australia Motor Vehicle Certification
Australia Child Restraint System Certification
New Zealand Motor Vehicle Type Approval
Korean product safety KC certification is a compulsory certification implemented by the Korean state. It is supervised by the Ministry of Trade, Industry and Energy of Korea which formulates related laws, enforcement decrees and rules on product safety. According to the Korean Electrical Appliances and Consumer Goods Safety Management Act, and the Korean Special Children's Products Safety Management Act, the certification scope includes three categories: electrical appliances, household products and children's products. Among them, there are 442 of electrical appliances that require compulsory certification, 66 of household products, and 36 of children's products. For these nearly 600 kinds of products within compulsory safety certification scope, the Ministry of Trade, Industry and Energy has stipulated different procedures of certification according to their safety levels, includes: safety certification, safety inspection and supplier’s declaration of conformity. Products within the compulsory certification scope must conduct KC certification and bear the KC mark on their products before entering the South Korean market.
Standards:
KMVSS Article 112-2, KMVSS Article 112 -10, National Technical Standards Notice No. 2017-032
Brake Lining Testing Items:
Compressibility test, Shear strength test, Hardness Testing
KMVSS Article 112-2, KMVSS Article 112 -10, National Technical Standards Notice No. 2017-032
Brake Lining Testing Items:
Compressibility test, Shear strength test, Hardness Testing
Brake Fluids Testing Items:
Equilibrium reflux boiling point, Wet ERBP, Kinematic viscosities, pH value, Fluid stability, Corrosion, Fluidity and appearance at low temperatures, Water tolerance, Compatibility, Resistance to oxidation, Effect on SBR cups, Stroking properties, Container information
Brake Hose (Hydraulic/Pneumatic/Vacuum) Testing Items:
Expansion test, Burst strength test, Whip resistance test, Tensile strength test, Water absorption sequence tests, Low temperature resistance test, Brake fluid compatibility test, Ozone resistance test, Dynamic ozone test, High temperature impulse test, End fitting corrosion test, Constriction test, etc.
Procedure:
Prepare documents, testing, submit registration, approval
Please click here for more Korea certifications:
Philippines began implementing the compulsory product certification system on August 2, 2006. The authority is the Department of Trade and Industry (DTI). The regional office of DTI is responsible for certification-related testing and auditing activities. The Bureau of Product Standards (BPS) is subordinate unit of Department of Trade and Industry Philippines (DTI). It is responsible for the development, implementation and coordination of all standardization and the development of the BPS national standards in Philippines. Bureau of Product Standards (BPS) includes Standards and Regulations Department, Standard Information Service Department, Product Certification Department, Quality Management System Certification Department, and Conformity Assessment Body Accreditation Department.
Motor vehicle components requiring mandatory certification include tires, brake fluids, seat belts, safety glazing, helmets, LPG cylinders, etc.
Standard:
PNS 239/MVSS 116:1988
Brake Fluids Testing Items:
Equilibrium reflux boiling point, Wet ERBP, Kinematic viscosities, pH value, Fluid stability, Corrosion, Fluidity and appearance at low temperatures, Water tolerance, Compatibility, Resistance to oxidation, Effect on SBR cups, Stroking properties, Container information
Procedure:
Submit application, initial factory audit (if needed), testing, approval, surveillance
Please click here for more Philippines certification:
The Vietnamese motor vehicle type approval authority is Ministry of Transport of Vietnam (MT) and its subdivision Vietnam Register (VR). For both imported and local assembled motor vehicles there are type approval procedures need to follow.
Since the year of 2018, Vietnam Register has mandated certification for aftermarket auto parts includes helmets, glazing, wheels, rearview mirrors, tires, headlamps, fuel tanks, batteries, interior materials, pressure vessels, power batteries, etc.
Standard:
22TCN 296-02, TCVN 11496-2016, TCVN 11497-2016, TCVN 11498-2016, TCVN 11499-2016, TCVN 11500-2016, TCVN 11501-2016, TCVN 11502-2016, TCVN 11503-2016, TCVN 11496-2016, TCVN 6822-2001, TCVN 6823-2001, TCVN 7237-2003, TCVN 7236-2003, TCVN 7235-2003
Motorcycle Brake Hose Testing Items:
Tolerance for length, Requirement of fitting, Installation of cap and cove, Threaded joints requirement, Length of patchwork and lead holding material, Surface defects, Conductor surface requirements, Installation of protective covers, Slip resistance, Control performance, Durability
Since the year of 2018, Vietnam Register has mandated certification for aftermarket auto parts includes helmets, glazing, wheels, rearview mirrors, tires, headlamps, fuel tanks, batteries, interior materials, pressure vessels, power batteries, etc.
Standard:
22TCN 296-02, TCVN 11496-2016, TCVN 11497-2016, TCVN 11498-2016, TCVN 11499-2016, TCVN 11500-2016, TCVN 11501-2016, TCVN 11502-2016, TCVN 11503-2016, TCVN 11496-2016, TCVN 6822-2001, TCVN 6823-2001, TCVN 7237-2003, TCVN 7236-2003, TCVN 7235-2003
Motorcycle Brake Hose Testing Items:
Tolerance for length, Requirement of fitting, Installation of cap and cove, Threaded joints requirement, Length of patchwork and lead holding material, Surface defects, Conductor surface requirements, Installation of protective covers, Slip resistance, Control performance, Durability
Procedure:
Submit application, factory audit, sample delivery, testing, certificate issuance, conformity of production
Please click here for more Vietnam certification:
CMVR is the abbreviation of Central Motor Vehicles Rules. Its standard committee is called CMVR-TSC (CMVR-Technical Standing Committee) and belongs to the Indian Ship, Road Traffic and Highway Administration. Since 1991, the CMVR regulations stipulate that motor vehicles and their systems and components must be approved according to the CMVR regulations before entering the Indian market. The tests includes Safety, Emissions and the type approval process includes Factory Audit, Type Testing and Conformity of Production (CoP).
Standards:
AIS-061, IS 7079-2008
Brake Lining Test Items:
Brake testing, Cold performance equivalence test, Speed sensitivity test, Mechanical characteristics Test-Shear strength, Compressibility, friction coefficient
Hydraulic Brake Hose Test Items:
Expansion test, Burst strength test, Whip resistance test, Tensile strength test, Water absorption sequence tests, Low temperature resistance test, Brake fluid compatibility test, Ozone resistance test, Dynamic ozone test, High temperature impulse test, End fitting corrosion test, Constriction test
Procedure:
Application, factory audit, sample test, approval, surveillance audit
Please click here for more Vietnam certification:
ESMA has established Technical Committees in the fields of food products, construction and building materials products, electrical and electronic products, chemical and plastic products, mechanical products, petroleum products and lubricants, and metrology and information technology.
The Cabinet Resolution No (12) of 2018 Automotive Spare Parts was published in 2018 by Prime Minister, United Arab Emirates which stipulates that 14 categories of auto parts are prohibited to import or place the product in the market subject to the provisions of this decision unless it is registered in accordance with the UAE conformity assessment scheme (ECAS) and has obtained a certificate of conformity in accordance with the provisions of this resolution. Including: Brake Systems, Brake Pads, Engine Radiators, Safety Belts, Rear View Mirrors, Batteries, Oil Filters for Internal Combustion Engines, Air Filters, Laminated Safety Glass, Rims, Door Locks and Door Hinges, Retro-reflective Markings and Signaling Devices, Alarm Systems for Buses and Commercial Vehicles, Relays and Flashers.
The Cabinet Resolution No (12) of 2018 Automotive Spare Parts was published in 2018 by Prime Minister, United Arab Emirates which stipulates that 14 categories of auto parts are prohibited to import or place the product in the market subject to the provisions of this decision unless it is registered in accordance with the UAE conformity assessment scheme (ECAS) and has obtained a certificate of conformity in accordance with the provisions of this resolution. Including: Brake Systems, Brake Pads, Engine Radiators, Safety Belts, Rear View Mirrors, Batteries, Oil Filters for Internal Combustion Engines, Air Filters, Laminated Safety Glass, Rims, Door Locks and Door Hinges, Retro-reflective Markings and Signaling Devices, Alarm Systems for Buses and Commercial Vehicles, Relays and Flashers.
Standards:
UAE.S/GSO ECE 90, UAE.S GSO ECE 13-1, UAE.S GSO ECE 13-2, UAE.S GSO ECE 13-3, UAE.S GSO ECE 13-4, UAE.S GSO ECE 13-5, UAE.S GSO ECE 13-6, UAE.S GSO ECE 13H
Brake Lining/Shoe Testing Items:
Brake testing, Cold performance equivalence test, Speed sensitivity test, Mechanical characteristics Test-Shear strength, Compressibility, friction coefficient
Brake Disc/Drum Testing Items:
Geometric requirements, Performance tests according to Regulations No. 13/13-H, Comparison test with dynamic frictional properties of the original part, high load and thermal fatigue test
Procedure:
Submit registration, sample testing, certificate issuance, registration approval
The Eurasian Economic Union (EAEU), also known as the Eurasian Union (EEU), was formerly the Customs Union (abbreviated as CU) of Russia, Belarus and Kazakhstan. Armenia and Kyrgyzstan subsequently joined the union, and the Eurasian Economic Union was formally established in 2015.
Eurasian Conformity (EAC) is a product certification system formulated and implemented by the Eurasian Union. At present, the Eurasian Union is expected to issue 66 product technical regulations, and 48 regulations have been enforced. The product scope covers a wide range of food, electrical appliances, children products, transportation, chemicals, light industrial products and other fields. All products listed in the unified list of EAC certification, without obtaining a certificate or applying the certification mark in accordance with regulations, shall not be imported, sold, or used in business service places.
Standard:
TR TS 030/2012
Brake Fluids Testing Items:
Equilibrium reflux boiling point, Wet ERBP, Kinematic viscosities, pH value, Fluid stability, Corrosion, Fluidity and appearance at low temperatures, Water tolerance, Compatibility, Resistance to oxidation, Effect on SBR cups, Stroking properties, Container information
Procedure:
Submit application, factory audit (if needed), sample testing (if needed), certificate issuance, maintenance
INMETRO (National Institute of Metrology, Standardization and Industrial Quality) is a government department directly under the Ministry of Development, Industry and Foreign Trade of Brazil. With the enactment of new ordinances and implementation laws, more and more products are included into INMETRO mandatory certification scheme.
Our INMETRO certification service scope covers LED Light Sources, Road Lamps, Automotive Parts, Motorcycle Parts, Bicycle Parts, Dangerous Goods Transportation, Child Seats, Photovoltaic Products, Pressure Vessels, Household Appliances, Children's Toys and Supplies, Building Structure, Personal Protective Equipments, Explosive Atmosphere, Medical Equipments etc., a total of more than 700 products in 155 categories.
Our INMETRO certification service scope covers LED Light Sources, Road Lamps, Automotive Parts, Motorcycle Parts, Bicycle Parts, Dangerous Goods Transportation, Child Seats, Photovoltaic Products, Pressure Vessels, Household Appliances, Children's Toys and Supplies, Building Structure, Personal Protective Equipments, Explosive Atmosphere, Medical Equipments etc., a total of more than 700 products in 155 categories.
Standards:
Ordinance no. 55, Ordinance no. 78
Brake Lining Testing Items:
Shear test, Dilation and growth, Asbestos detection, Hot compressibility, Compressibility ambient temperature, Hot compressibility
Brake Fluids Testing Items:
Equilibrium reflux boiling point, Wet ERBP, Kinematic viscosities, pH value, Fluid stability, Corrosion, Fluidity and appearance at low temperatures, Water tolerance, Compatibility, Resistance to oxidation, Effect on SBR cups, Stroking properties
Equilibrium reflux boiling point, Wet ERBP, Kinematic viscosities, pH value, Fluid stability, Corrosion, Fluidity and appearance at low temperatures, Water tolerance, Compatibility, Resistance to oxidation, Effect on SBR cups, Stroking properties
Procedures:
Application, factory audit, testing, certificate issuance, maintenance
Please click here for more Brazilian certification:
Brazilian INMETRO certification for motor vehicle components and consumer goods
Brazilian LCVM for agricultural and road machinery
Brazilian ANATEL certification for telecommunication device
Brazilian NR certification
Brazilian ANVISA registration
Brazilian INMETRO certification for explosive atmosphere
Brazilian INMETRO certification for LED light source
Brazilian INMETRO certification for street lamp
Brazilian INMETRO certification for photovoltaic products
Brazilian LCVM for agricultural and road machinery
Brazilian ANATEL certification for telecommunication device
Brazilian NR certification
Brazilian ANVISA registration
Brazilian INMETRO certification for explosive atmosphere
Brazilian INMETRO certification for LED light source
Brazilian INMETRO certification for street lamp
Brazilian INMETRO certification for photovoltaic products
Argentine Ministry of Industry’s Regulation No. 91 of 2001 and Regulation No. 66 of 2008 established the mandatory certification system (Certificate of Homologation of Auto Safety Part - Certificado de Homologación de Autoparte de Seguridad - C.H.A.S.) for Argentine automotive aftermarket parts and safety units, which is applicable for both imported or local produced products. Related aftermarket parts shall be certified and registered with the Argentine Ministry of Industry before being allowed to be sold in the Argentine market.
Standards:
IRAM AITA 6-C2, IRAM AITA, 6H1, 6H2, 6H3, 6H4, 6H5, 6H10
Brake lining Testing Items:
Brake testing, Cold performance equivalence test, Speed sensitivity test, Mechanical characteristics (Shear strength, Compressibility, Friction coefficient)
Brake Fluids Testing Items:
Equilibrium reflux boiling point, Wet ERBP, Kinematic viscosities, pH value, Fluid stability, Corrosion, Fluidity and appearance at low temperatures, Water tolerance, Compatibility, Resistance to oxidation, Effect on SBR cups, Stroking properties, Container information
Procedure:
Submit application, factory audit (if needed), sample test (if needed), approval, surveillance
Please click here for more Argentina certification:
Multinational Homologation SolutionsATIC provides more than 28 categories' system, separate technical unit, component multinational compliance and homologation solutions
Multinational Homologation Solutions
ATIC provides more than 28 categories' system, separate technical unit, component multinational compliance and homologation solutions
CNG/LPG Components
Many countries established regulations and homologation procedures for clean energy applications. ATIC team has accumulated many years homologation experience in this area. We are now providing comprehensive services including multinational regulations identification, regulation comparison, training, Q&A, testing and homologation.
Europe, the United States, Japan, Korea, China and India have a comprehensive electric vehicle homologation system. Emerging markets such as the Middle East, Indonesia, and Thailand are gradually developing electric vehicle standards. Our service includes multinational regulations identification, comparison, training and Q&A.
CNG/LPG Components
Many countries established regulations and homologation procedures for clean energy applications. ATIC team has accumulated many years homologation experience in this area. We are now providing comprehensive services including multinational regulations identification, regulation comparison, training, Q&A, testing and homologation.
Brake system components such as brake lining, brake pads and shoes, brake discs are critical safety components. Most countries established compulsory certification scheme for both original and replacement parts. Our market access solution including regulation consulting, training, testing and certification covering all the relevant countries/regions world wide.
Tires are required for mandatory certification in many countries. Besides safety testing, many countries are introducing labelling requirements with regard to the display of information on the fuel efficiency, wet grip and external rolling noise of tires. ATIC provides multinational consulting and homologation services for tires, especially for emerging markets.
In-vehicle communication system is more and more important in internet of vehicle systems. Both automotive and telecom regulations need to be considered. Relying on our professional team and regulation database ATIC provides in-vehicle communication system homologation, training and consulting services covering more than 17 countries.